Next NW LAM? - Saxperience

jonathan · 2nd December 2002, 18:58

When, were, what time

Simo^p · 3rd December 2002, 08:37

Hi Jonathan...

Not too sure mate. It cant be this weekend as many people are off down to Leicester for the SSC bash.

The weekend after is a possible? I think we'll have to start meeting up a little earlier now that the dark evenings are here.

Simo'

jonathan · 4th December 2002, 05:08

OK, will you post some details. I am off on the 14th and 15th, subject to permission from the wife, so would try to get to a meet up.

Good site, btw Simo, not been on it for a while, you even make it sound like a cam swap is an easy thing to do <img src= "smileys/happy.gif"> !!!

While I'm at it, do you have the Goat Developments big brake conversion on your car? If so, was there much angle grinding needed to get the kit and caliper to fit? Any opinion gratefully received.

Jonathan

Simo^p · 4th December 2002, 05:51

A cam change isn't a biggy... <img src= "smileys/silly.gif">

I dont have the Goat front brake conversion... but I do have the rears, which were very good discs actually..

I helped Danny Speight fit his Goat front big disc conversion... The brackets supplied were actually pretty good. Everyone chooses a slightly different orientation of fitment, but they "did" fit with a minimum of grinding.

Danny will no doubt reply on here before you get to check for this response.

Over to you Speight-boy...

Simo'