Saxo Wire Diagram / Trigger Wheel - Saxperience

Jaiz · 30th June 2009, 07:26

Hey everyone im gonna install megasquirt on my TU5J4 does anyone have a diagram of the trigger wheel? + wire diagram?

Thanks alot in advanced

raunchz · 30th June 2009, 08:40

trigger wheel is 60-2 from memory.

Jaiz · 30th June 2009, 08:52

Quote:

Originally Posted by raunchz

trigger wheel is 60-2 from memory.

thanks, do you also have a wire diagram? and maybe do you have any documentation on the engien so we can see what injector size dweel time etc.

Jaiz · 30th June 2009, 20:53

/bump really need some help here if anyone can provide it would be greatly appriciated

Jaiz · 13th April 2010, 11:07

could anyone be helpfull with this? and also does anyone have a base map for megasquirt for TU5j4

raunchz · 13th April 2010, 11:09

What info you need?!

ryanmt · 13th April 2010, 14:19

The injectors are Pico IWP 006, if you google that you can find the CC and impedance etc on the pico data sheet the dwell depends totally on what the engines doing at the time so we cant exacly give you a number

is it a basemap your after? The crank sensor is your standard hall sensor type pickup and it is 60-2

luthor1 · 13th April 2010, 14:27

The Pico IWP006 are 226cc at 3-bar, and it's a VR not a HALL sensor for the crank pickup.

Start with 2.2ms dwell, 4.5 on cranking.

What MS are you using? What processor, and what board version? Also what firmware??

Andy