what does spanner signal mean? - Saxperience

gazzainayr · 3rd August 2010, 20:14

hi folks..someone help me!!! on my saxo furio where the digital clock + the mileage counter is next to it a spanner signal has suddenly appeared..what does this signal mean? its doing my head in!! any advice appreciated..gazza

adam_saxo · 3rd August 2010, 20:21

It means you car is due a service.

If you have carried out a service and need to reset then follow the instructions below:

Using button located at the left hand side of speedometer:
Switch the ignition off.
Press and hold button
Switch on the ignition.
Keep the button depressed for 10 seconds.
The “spanner” symbol will go out and the display read 0.

CbVtR · 3rd August 2010, 20:23

It means your car needs a service mate, it counts down from 12,000 miles normally and informs you that your car needs a service, somewhere on here it tells you how to reset it back to normal, but my advise would be to service it and then reset the light

CbVtR · 3rd August 2010, 20:24

Just beat me to it lol

gazzainayr · 3rd August 2010, 20:35

cheers adam mate..will give that a go + get back to you..thanks cbvtr also..

mardiGRANT · 3rd August 2010, 20:51

it means something needs tightening up