Saxo Problems & Queries If you're having problems with your Saxo and you're after a bit of advice, check this forum out... |
 |
16th November 2010, 21:03
|
#1
|
Regular Poster
Join Date: Mar 2010
Location: Northwest
Posts: 276
Car(s): Saxo 1.1i
Saxo 1.5 02
Corsa 1.2 SXI (02)
|
Revs jumping when accelerating
Hey
I had my saxo serviced a week ago I dont know whether this will affect it, but anyway when i get into second gear if i accelerate more powerfully than usual my revs jump up by about 1,000 and then go back down, but does not jump when idle of accelerating softly,
anyone got any ideas as to what this could be and would it affect fuel consumption
thank you
|
|
|
17th November 2010, 00:09
|
#2
|
Saxperience Hardcore!
Join Date: Nov 2007
Location: Guantanamo Bay
Posts: 28,700
Car(s): oyster card
|
Is it as though it hits a fake limiter?
__________________
|
|
|
17th November 2010, 00:23
|
#3
|
Infrequent Poster
Join Date: May 2009
Location: York-Hull
Posts: 222
Car(s): Saxo VTR MK2
|
Need more info. all in gear etc and as db sax said, as if you hit a limiter.
|
|
|
17th November 2010, 02:18
|
#4
|
Regular Poster
Join Date: Sep 2006
Location: Huddersfield
Posts: 393
Car(s): Zx volcane td
Peugeot 205 1600 auto
|
Sounds like a slipping clutch - the more you accelerate the more pressure you put on the clutch. To get a really good slip floor it up a hill in high gear and watch those revs fly
|
|
|
17th November 2010, 08:25
|
#5
|
Saxperience Forum Bum
Join Date: Sep 2008
Location: Nottingham
Posts: 3,194
Car(s): Fabia vRS + Miata
|
Mine did this, if accelerated hard power kicked in then disappeared and came back .. I did full service and it's fine now.
|
|
|
17th November 2010, 10:36
|
#6
|
Regular Poster
Join Date: Mar 2010
Location: Northwest
Posts: 276
Car(s): Saxo 1.1i
Saxo 1.5 02
Corsa 1.2 SXI (02)
|
It don't do it in first gear but in all the others, it feels like the clutch is pressed in, then goes after a few seconds, like drive Along and press your clutch it feels like that
|
|
|
17th November 2010, 10:42
|
#7
|
Saxperience Hardcore!
Join Date: Nov 2007
Location: Guantanamo Bay
Posts: 28,700
Car(s): oyster card
|
Release bearing, clutch plate could even be the input shaft collar.
__________________
|
|
|
17th November 2010, 11:02
|
#8
|
Regular Poster
Join Date: Mar 2010
Location: Northwest
Posts: 276
Car(s): Saxo 1.1i
Saxo 1.5 02
Corsa 1.2 SXI (02)
|
Is that a simple fix, how much would it be to fix?
|
|
|
17th November 2010, 11:07
|
#9
|
Saxperience Hardcore!
Join Date: Nov 2007
Location: Guantanamo Bay
Posts: 28,700
Car(s): oyster card
|
110£ labour for any of it. New release bearing is £30 full clutch kit is £95 if its the input shaft then new gearbox time! £50ish to £100 for a gearbox.
__________________
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 12:47.
|