help with identifying cams and make????

[liam_bate]

hi there ive looked at my mates w reg saxo vts and had a look behind the pulley cover and have found that his engine has adjustable pulleys and the markings on the cams say.... between bearing and lobe 1 its got a 6 or 9, rotate the cam 180' and then theres a 00. also in between lobe 1 and 2 there is a 5, rotate 180' again and theres a 6 or 9 again. are these an aftermarket cam or is this standard vts gear? the cars rev limiter is on about 8k, maybe higher because its right at the end of the rev counter so dont know exactly. can anybody help me with this????

[Gabbastard]

I think theyre standard mate. Take off the cam cover and look at the end of the cam, the end opposite the pulleys. Most cam manufacturers will stamp the cam details on the end face.