Important! : help vtr 53 broke

[josh92vtr]

hi guys i need help i have a vtr 53 plate put a gti phase one engine i think no egr valve one senser one plug ecu on my engine loom where it connects to my ina loom black round thing the pins dont match and i am not getting a spark or fuel what do i need to run this 106 gti do i need key fog and emmbiliser or is it oki on mine is

[josh92vtr]

can any one help or tell me what i need to do to run this

[greyjasper51]

did you go to school??

thats almost impossible to understand... have you put the engine in? and your talking about the chassis plug... it has to be spliced with a plug that fits... if the ecu is unlocked then you need to remove the imobiliser box. as far as im aware none of the petrol saxo's have an egr... its not going to run until you have connected the engine loom to the car loom...

and you need an unlocked ecu, later phase 2 chassis plug (scrap yard) and a good command of the english language... ability to read and write helps...

[josh92vtr]

yes engine is in and its a 2000 plate with single plug ecu which is unlocked and yes where the loom connects to the ina loom there are pins inside that and they dont match up so would i need a phase 1 ina loom

[greyjasper51]

you need to splice the correct plug on or change to a later type loom.... PM tom5190 as i believe he can splice the loom for you for a pretty penny then it is plug and play as ling as the ecu is unlocked... oh and youll need to block the fuel return off on the injector rail...

[josh92vtr]

and this is the pug 106 gti i am using

[josh92vtr]

would that be a later engine loom or ina loom and where can i find PM tom5190

[greyjasper51]

i forgot you cant PM yet you dont have enough posts and time... and the gti plugs are normally a phase 1 saxo plug, iirc the later ones had 2 plugs but dont quote me on that... you have a black plug on the inner wing yes? then it will need to be spliced, put some pics up if you can it makes things easier

[josh92vtr]

yes i do mate oki will try do that not sure how

[greyjasper51]

upload the pictures to imageshack or an image hoster... then use the direct link in an advanced post to post them up

[josh92vtr]

how do i get hold of tom5190

[josh92vtr]

[josh92vtr]

strugling to upload a pic but yes i do have the round plug and if u got face book then can show pic mate so u recomend splice the plug or put a vts later phase 2 engine loom in is that what u mean

[greyjasper51]

yeah, im sure tom5190 does it... he helped me with mine, and i think if you look on

http://www.saxperience.com/forum/sho...ighlight=tu5j4

thats the engine plug yeah??

and youll have one of those on the inner wing??
http://www.saxperience.com/forum/sho...d.php?t=451749

[josh92vtr]

yeah mines same just biger bulk and mine ina loom pins go 3 10 10 3 thats its my engine loom is diffent

[greyjasper51]

tom can sort you out on that one

[josh92vtr]

can u give me a text pal 07771298698 just so if i get any probs can ring for advice thanks josh

[josh92vtr]

so if mines a 2000 plate is that phase one or two if i cant find someone or get hold of tom to splice then what do i do change ina loom or could i use a saxo vts phase 2 engine loom to fit my pug engine and my ina loom

[greyjasper51]

ill drop you a text when i get home mate, no problem