driveshaft - Saxperience

L8R_VTR · 24th June 2005, 00:03

hi guys and gals just want to know I have a mk1 99 vtr and the drivers side driveshaft is knackered, will any driveshaft fit or does it have to be the sa

me p.s will the mk2 ones fit my mk1 any help is appreciated many thanks

Scott^p · 24th June 2005, 00:08

mk2 should fit BUT some came with a different thread on the hub end, though think it can be remedied by using the correct nut from the mk2

L8R_VTR · 24th June 2005, 00:10

Hi scott is that standard mk2 or vtr/s mk2 mate

Scott^p · 24th June 2005, 00:13

as far as im aware all shafts should fit all models, the lengths etc shouldnt differ and as far as im aware the splined hub sizes are the same. Would be worth while checking with some suppliers though

rustybolt · 24th June 2005, 03:06

will any shaft fit? Fiesta ones are pretty cheap...

Ratty · 24th June 2005, 19:34

No any shaft will not fit, there are 3 or 4 variations.

1 is normal (for example sake)
1 has a longer spline that goes into the hub end that requires a different hub nut
1 is normal but has a different face that joins the hub, ie one is straight and the other has a lip.
last 1 is longer and has the lip.

so you need to make sure you get the same as what you have else it wont fit in the hub properly and you will keep braking wheel bearings.