Vibrations! - Saxperience

jasonwellwicked · 23rd January 2009, 15:36

Hello all,

I have quite a substantial install consisting of uprated speakers all round and a subwoofer. I have alreaady sound deadened the doors with Dynamat xtreme and Skins 3 stage system. However it is the door pins which are rattling and distracting me!

I NEED them in place, hence will not be removing them.

Has anyone got any clever suggestions to prevent them rattling?

Cheers

J

kieranc07 · 23rd January 2009, 18:21

that shit they put on coubourd doors like a foam with a sticky back take the door card off put that around the hole then stick it back on make sure its quite thin tho because if the pins get stuck well u will lock ur self out ect lmao other than that dno mate

kieran.

infinitym4ge · 23rd January 2009, 18:21

When your door card's are on they shouldent rattle, when the door cards are off they rattle alot.

jasonwellwicked · 23rd January 2009, 18:50

'Kieranc07' - Thanks for your response, something with those types of dampening properties would work I would imagine. Do you happen to know where I could hold of 'the item you described'?

'Infinitym4ge' - To re-articulate...Im pumping half a kilo watt of bass through the saxo! Im afraid that there is enough 'play' in the doorcards doorpin-well such as to permit it to rattle.

Joe3490 · 10th February 2009, 15:59

Oh dear Jason, Maybe your should get rid of the Sub and pop it into my car that will stop yours rattling

haha!!

bluenotesmiley · 10th February 2009, 16:05

Put sound deadening around the metal rod part of the door pin and around the hole where the door pin protrudes out of the doorcard [this would be done from the inside].

I would assume that it would be enough to deaden most noise from rattling and you would use very little material.