New Product got delieved

[tease1986]

Hi i have just got some new products delievered today

Got some

Poorboys SSR1 polishing compound
Achillies Prep
and some Meguiers Soft foam pads.


going to give good detail at weekend

this is order im going to do with some other products i have will it be ok

Rinse
Wash
Dry
Clay
rinse
Dry
Remove old wax Achillies Prep
rinse
poorboys ssr1 (get those swirls out)
then Poorboys sealant (wet mirror Finsish)
THEN some AG high definistion wax
also got some megiuers hot shine tyre spray
AG glass cleaner
and just use AG polish on the wheels :-)

ready for FCS

[saxovtsmad]

Originally Posted by tease1986

Hi i have just got some new products delievered today

Got some

Poorboys SSR1 polishing compound
Achillies Prep
and some Meguiers Soft foam pads.


going to give good detail at weekend

this is order im going to do with some other products i have will it be ok

Rinse
Wash
Dry
Clay
rinse
Dry
Remove old wax Achillies Prep
rinse
poorboys ssr1 (get those swirls out)
then Poorboys sealant (wet mirror Finsish)
THEN some AG high definistion wax
also got some megiuers hot shine tyre spray
AG glass cleaner
and just use AG polish on the wheels :-)

ready for FCS

wash again after claying mate

[P90PTS]

Are you polishing by hand? You won't remove many swirls with SSR1 it's a really fine polish but you'll still get good results.

As Mick says, wash after claying, aslo wash after polishing

[tease1986]

well yeah i went to a place today called ne detailing which is highly reccomended today im doing it by hand yes and i was told to try menzenrua final finish but they had none in so i got reccomended to get poorboys ssr1 i had little go on bonnet this after noon and i did not really take any minor scratchs or swirls out would it be better to get the final finish if im doing it by hand ?????

[saxovtsmad]

look at the thread i made regarding a scratch i used mezerna final finish