fuel line location

[morgansvts2000]

any 1 know where the fuel rail line is supposed to go on my vts as cant find where it goes as its making my car sound very bad when idling

its the fuel line return pipe has come off and cant see where it goes

[QUOTE=morgansvts2000;6275261]its the fuel line return pipe has come off and cant see where it goes, i meant to say

[mlawlan69]

it has come off the rail?

look underneath your inlet manifold for a long piece of plastic with two big nipples and pipes attatched, the return pipe is the second one from the left.

[morgansvts2000]

thanks mate will av alook for that now, il let u know if i find it or not

[mlawlan69]

no worries, it will be very obvious once you've seen it, especially with a loose fuel pipe !

[morgansvts2000]

i cant find it like, so il load up some pics now if i can off my mob, n i just found a clip that isnt connected and cant find where that goes either plus a pipe on the throttle body that doesnt go anywhere either, cause im new to saxo's i dnt av much knowledge about em

[mlawlan69]

get a few photos and i will see if i can help, spent a lot of time under the bonnet of my shit bag vts so have an idea of what should go where.

[morgansvts2000]

iv got pics but cant seem to upload them now

[mlawlan69]

http://www.saxperience.com/forum/sho...d.php?t=271487

[morgansvts2000]

just insalling it on my phone shouldnt take too long







about time too hahaha

[mlawlan69]

that is the FPR pipe.

it should go from underneath the inlet manifold to the rail, but it is already connected to the inlet, in your first photo, far right hand side there looks like a metal disk, that is the fuel pressure regulator on the end of your fuel rail. it has a nipple, connect the pipe to it.

[morgansvts2000]

will do now thanks mate

i av found a nipple rite on the bk of the fuel pressure ip that it cause the pipe is too short

its already connected to the fuel rail nipple but its just hanging there

[mlawlan69]

is it 1 or 2 pipes? as in 1 pipe from inlet and 1 pipe from fpr

as the pipe looks easy big enough in pic 1 and too short in pic 2 :$

[morgansvts2000]

so its just connecting them both together with a connector n, will this stop my car from bein a pig

[mlawlan69]

no just take one pipe and connect it to where the other pipe was connected

ie inlet to fpr, one solid pipe. it should stretch easy.

[morgansvts2000]

its 2 pipes 1 as u say the fpr pipe and 1 from the throttle body

il av a blast of that nw

is the inlet where the 16v is or is the plastic bit under the fuel rail cause iv found a nipple on the plastic where the fuel rail sits

[mlawlan69]

inlet is 2 parts on 16v the nipple is connected to the pipe already as i can see it in picture 2 take that pipe and connect it to the nipple on the fpr pipe.

[morgansvts2000]

iv done that, when i was looking for my socket i felt another nipple under the inlet where it connects to the block and got a bit confused, thank you mate for ur pationts and help very appriciate it