throttlebodied white s2 rallye - Page 10 - Saxperience

vtr-tec · 7th March 2009, 18:04

Aidy you whore! loving the progress

NickH1987 · 7th March 2009, 18:32

corr... you must have some nuts to take your electrics apart... when i did a similar thing the engine warning lights never went off

infamousaidy · 7th March 2009, 22:26

james, i need your wiper arm in my life!

nick, my clock has decided to spazz out and not work but other than that its all fine, we just didnt rush in, went steady and made sure we started the caer after every cut just incase. although, tbh when it came to cutting thru the main part of the loom i kinda shite my pants. wiring has always been my nemesis so we faced my fear

also i might have found someone willing to let me have his brembos. yay

titchster · 8th March 2009, 07:37

You haz a multimeter and andy, what else would you need to fear? Haha.

Oh, and dont get ya hopes up too much about them brakes, unless he's already texted you agreeing something, cause you know how indecisive trev is.

infamousaidy · 8th March 2009, 20:39

andys busy doing his own car mate. along with the neatest subframe biasvalve hydro hanbrake combo in the world!

and yeah i know he's indecisive.

right a bit of progress today, i turned up at the yorks RR day and was ordered to run the car. it made 133 bhp but was underfueling, probably down to the big valve head on the jp4 engine. plan is to find a 3.5 bar pressure reg to try and up the fueling a bit to last til i can afford a remap. i'm pretty chuffed with the figures tho. especially to say its still on a cast gti exhaust manifold

piggy123 · 8th March 2009, 22:04

lovely example aidy

what are your future plans for the engine and suspension?

infamousaidy · 9th March 2009, 19:46

cheers piggy.

plans are, find a job, spend more on itlol.

i'm considering a remap, but it'd be daft spending all that just to get the fuelling right, so i'm thinking of some phase 3 newman cams for the c2 engine and a janspeed manifold then a remap. then the engine is done.

planning on giving the underneath some attention too. its a bit of a state.

suspension wise its already on gangsta max shocks and springs, has all the bushes except the arb ones uprated to a mix of shenpar/polysport/polyrace. i dont know what i want to do about dampers, last time my mate was following me down a country road he said he was strufggling to keep up cos his billies were breaking his spine. some form of coilovers would be nice

infamousaidy · 9th March 2009, 19:47

oh put these on earlier too

piggy123 · 9th March 2009, 19:54

nice

carries on with the theme
if you go coilies i would say the billie group N's for track application or B8's for fast road with stiff springs and Grp N top mounts

infamousaidy · 9th March 2009, 20:02

we'll see what happens mate. i'm currently between jobs due to redundancy so it's the cheap stuff first tbh

piggy123 · 9th March 2009, 21:30

i think you should come help me clean my extremely dirty XSi considering how clean yours is

piggy123 · 9th March 2009, 21:31

P.S. sell me your helmet hammock

titchster · 9th March 2009, 22:30

Angel eyes... smoked repeaters, what next? Lexus lights?

Might be up in your neck of the woods tomorrow mate, will let you know if we are.

VTEC-Saxo · 9th March 2009, 22:31

where did you get those rallye decals mate ?

infamousaidy · 10th March 2009, 11:08

Quote:

Originally Posted by piggy123

i think you should come help me clean my extremely dirty XSi considering how clean yours is

mate, i'll let you in on a little secret, all the hard work was done for me

Quote:

Originally Posted by piggy123

P.S. sell me your helmet hammock

go on then 80 notes posted

Quote:

Originally Posted by titchster

Angel eyes... smoked repeaters, what next? Lexus lights?

Might be up in your neck of the woods tomorrow mate, will let you know if we are.

how very dare you, black mr ones perhaps. and i'll beleive it when i see it

Quote:

Originally Posted by VTEC-Saxo

where did you get those rallye decals mate ?

http://stores.ebay.co.uk/grafixprint <<<< that should be the adress of his ebay store, he mainly does t shirts but has the equipment to do the stickers. he's a good mate of a mate so i sent him the file and got my stickers

IM_axles · 10th March 2009, 12:00

looks mint mate! Love it

piggy123 · 10th March 2009, 15:42

Quote:

Originally Posted by infamousaidy

mate, i'll let you in on a little secret, all the hard work was done for me

go on then 80 notes posted

lol nicely done

sort me out with the guy who cleaned yours

bit too much for me pal

how much did it set you back?
know anyone selling some 4point 3 inch harnesses?

infamousaidy · 10th March 2009, 17:55

Quote:

Originally Posted by piggy123

lol nicely done

sort me out with the guy who cleaned yours

bit too much for me pal

how much did it set you back?
know anyone selling some 4point 3 inch harnesses?

it cost me 28 quid, but you gotta be in it to win it these days like lol

i'd be tempted to sell my harnesses as i 'd like some black ones but its not exactly high on my priorities list tbh

infamousaidy · 10th March 2009, 18:02

well today i got busy with the fizzy again and got my painting by numbers kit out and the playdoh

remember the 3 lines down the inner wing in the boot?

well their getting smoothed.

and then out came the bright white paint

underneath needs another coat too really. if i could get the car high enough i'd be tempted to do the whoooooole floor underneath