saxo time attack/ race car

[paddymc]

finally got it running yesterday after a lot of messing. so ill have to sort out the wiring and tidy it up then off to get mapped!!

here are some pictures for good measure

[paddymc]

well after the problems with the cracked bottom end im on the way now

so i have dunnergtir from ballybane motors rebuilding the engine for me. droped down the fucked bottom end and the new one the other day but the new engine had bad bores, they were to pitted to use. so i went on the hunt for a new bottom end and i think i have have one sorted so ill be bringing it down to stephen later on tomorrow.

in the mean time ive become bored and decided to jazz up my cam covers.

rubbed the down with a sander and brought it back to metal, primed them up, sprayed a bit of silver paint on them and the the colours.

I think they look cool!



I was inspired by this car

[paddymc]

[AndySAXOp]

What spec cams are the 822?

[mangojace]

loving this build!Keep at it

[paddymc]

Originally Posted by AndySAXO

What spec cams are the 822?

taken directly from cat cams site

clearance [cl] 0.15mm
duration [0.1mm+cl] 266°

duration [1.0mm+cl] 242°
valve lift [cl=0] 11.05mm
cam lift - -

peak angle 110°

timing [1.0mm+cl] 11/51°...

lift at TDC [cl=0] 2.45mm ....

[AndySAXOp]

Give us a link to that dude I can't find it on the cat cams website.

[paddymc]

Originally Posted by AndySAXO

Give us a link to that dude I can't find it on the cat cams website.

they dont list them but if you type in 1322822 into the search window it shows them.

you need to be using explorer to use the site properly though