| Saxo Problems & Queries If you're having problems with your Saxo and you're after a bit of advice, check this forum out... |
 |
|
15th September 2011, 13:06
|
#1
|
|
Established Member
Join Date: May 2010
Posts: 1,434
|
Powerflex exhaust mounts
Just a quick question really, since fitting my powerflex lower engine mount I have a noise what sounds like my exhaust hitting the underside of the car, am I best buying the powerflex exhaust mounts designed for a saxo or the universal ones you cut to size from Halfords, bearing in mind my current backbox mounts sit quite stretched due to the location of the hangers.
Does anyone have experience with either?
Cheers
|
|
|
|
15th September 2011, 13:13
|
#2
|
|
Saxperience Forum Bum
Join Date: Jun 2011
Location: Abermule, Mid Wales.
Posts: 2,763
Car(s): Corsa Rally Car & Fiesta ST
|
once i fitted my powerflex lower gearbox/engine mount my exhaust was banging on the heat shield, so i fitted the race/rally spec saxo exhaust mounts from ebay and it stopped most of it.
it still did it in reverse so in the end i just removed the part of the shield that covers the handbrake cable adjustment nut/bolt.
its sorted it for me 
|
|
|
|
|
15th September 2011, 13:41
|
#3
|
|
Established Member
Join Date: May 2010
Posts: 1,434
|
I don't think its the shield mate cos I can't see where its touching :/ i'd think it would have rubbed a mark? And i've already removed that back shield just the front one remains....its puzzling me :/
|
|
|
|
|
15th September 2011, 16:13
|
#4
|
|
Established Member
Join Date: May 2010
Posts: 1,434
|
|
|
|
|
|
16th September 2011, 00:47
|
#5
|
|
Established Member
Join Date: May 2010
Posts: 1,434
|
anyone give me any suggestions as I wanna order them soon, i've got a feeling the noise may be the tailpipe hitting the left and right edges of the cutout in the bumper, although the noise sounds more metallic, it looks like it has been hitting it...I assume sturdier rubbers will solve this?
|
|
|
|
|
16th September 2011, 00:57
|
#6
|
|
Saxperience Post Whore
Join Date: Nov 2010
Location: Kent
Posts: 8,439
Car(s): Gen 7 Celica 190.
|
I have powerflex gearbox mount and exshaust they fine, exshaust dont hit car just hit the lower strut brace when i reverse lol.
|
|
|
|
|
16th September 2011, 00:58
|
#7
|
|
Saxperience Post Whore
Join Date: Nov 2010
Location: Kent
Posts: 8,439
Car(s): Gen 7 Celica 190.
|
Sorry for bad spelling btw on iphone 
|
|
|
|
|
16th September 2011, 01:49
|
#8
|
|
Established Member
Join Date: May 2010
Posts: 1,434
|
It must depend which exhaust mate, mines a powerflow which isn't much smaller than the size of the cutout, so i'm assuming its this as I cant see anywhere else it is hitting?
|
|
|
|
|
16th September 2011, 02:57
|
#9
|
|
Saxperience Post Whore
Join Date: Nov 2010
Location: Kent
Posts: 8,439
Car(s): Gen 7 Celica 190.
|
I got a powerflow to man never had any problems with it hitting car
|
|
|
|
|
16th September 2011, 13:20
|
#10
|
|
Established Member
Join Date: May 2010
Posts: 1,434
|
You posted on this last night lol, do you have powerflex exhaust mounts as well?
|
|
|
|
|
16th September 2011, 15:10
|
#11
|
|
Saxperience Post Whore
Join Date: Nov 2010
Location: Kent
Posts: 8,439
Car(s): Gen 7 Celica 190.
|
Yer mate got powerflex gearbox mount, powerflex exshuast mounts and a powerflow exshuast.
|
|
|
|
|
16th September 2011, 17:21
|
#12
|
|
Established Member
Join Date: May 2010
Posts: 1,434
|
Ah I see, might have to get myself some then...although are your hangers on the powerflow a bit short, mine are...whichever person at powerflow made it probably lost his glasses that day haha), either that or the motorsport exhaust mounts.
Which powerflex ones you get? could you link me please.
|
|
|
|
|
16th September 2011, 18:46
|
#13
|
|
Saxperience Post Whore
Join Date: Nov 2010
Location: Kent
Posts: 8,439
Car(s): Gen 7 Celica 190.
|
I got mine off ebay at shopping atm will do when get back mate.
|
|
|
|
|
17th September 2011, 01:00
|
#14
|
|
Established Member
Join Date: May 2010
Posts: 1,434
|
Kl mate thanks
|
|
|
|
|
18th September 2011, 00:09
|
#15
|
|
Established Member
Join Date: May 2010
Posts: 1,434
|
Did u get a chance to look mate?
|
|
|
|
|
18th September 2011, 08:54
|
#16
|
|
Saxperience Addict
Join Date: Nov 2006
Location: A farm shed in Aylesbury
Posts: 14,916
Car(s): Corolla AE86
Peugeot 205 B18C (in bits)
|
we do hard rubber exhaust mounts that are the right size.
|
|
|
|
|
18th September 2011, 15:19
|
#17
|
|
Established Member
Join Date: May 2010
Posts: 1,434
|
Do you think they will stop my exhaust hitting something on the undrerside after fitting a powerflex gearbox mount? Also my current rubbers are stretched a bit to reach both hangers due to the way powerflow made my backbox...will i be able to do this with yours?
Cheers
|
|
|
|
|
18th September 2011, 15:50
|
#18
|
|
Saxperience Forum Bum
Join Date: Mar 2009
Location: Stoke-on-trent
Posts: 2,640
Car(s): Mk5 Golf GTTDI
Mk2 VTR Project
|
I find the powerflex mounts with the 4 hanger holes are good for adjusting the exhaust into the right place got them on mine coz my backbox was hitting something under the car, like these 1s uve probably already seen them:
http://www.ebay.co.uk/itm/Powerflex-...item2567b2c6cd
|
|
|
|
|
18th September 2011, 17:31
|
#19
|
|
Established Member
Join Date: May 2010
Posts: 1,434
|
yeah those are the ones i've seen, the only problem is my exhaust sits perfectly with the standard mounts, albeit a bit stretched.
|
|
|
|
|
18th September 2011, 17:36
|
#20
|
|
Saxperience Post Whore
Join Date: Jul 2010
Location: Morley, Leeds
Posts: 8,469
Car(s): Civic ep3 type r powered by TDI NORTH
|
Powerflex ones are shit and snap. The Kam racing ones are strong as F**k and give just enough movement without been ott.
__________________
|
|
|
|
|
The Following User Says Thank You to Bedford126 For This Useful Post:
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 04:43.
|
Linear Mode
