Saxo LED dials guide (56K NO NO)

[darren-jay]

Originally Posted by Lukus-vtr

Go on phenoptix.com and there called PLCC SMD.

Link: http://www.phenoptix.com/shop/plcc2-...-21_30_38.html


There awesome and look really good

thanks for the link.

deffo going to to this as it looks well smart.

with the white ones how many did you use and was it just on the temp/fuel guage as it brakes the blue up a little.

cheers

[Spyro_UK]

thats actually pretty cool, very smart

[Lukus-vtr]

Originally Posted by darren-jay

thanks for the link.

deffo going to to this as it looks well smart.

with the white ones how many did you use and was it just on the temp/fuel guage as it brakes the blue up a little.

cheers

Well I bought 20 Blue and 4 White, I would recommend getting a bit more whites then I did because I recked one!

I agree, the blue was a little overpowering so I wanted something a little different

In the end I used 3 whites. One for the fuel, one for the temp and one for dipped beam. I originally had one for the fog light but I wrecked it and replaced it with a blue one.


If you do this don't forget which way the LED is facing when you take it off so you can put the new one on the right way.


Hope it goes well!

[darren-jay]

Originally Posted by Lukus-vtr

Well I bought 20 Blue and 4 White, I would recommend getting a bit more whites then I did because I recked one!

I agree, the blue was a little overpowering so I wanted something a little different

In the end I used 3 whites. One for the fuel, one for the temp and one for dipped beam. I originally had one for the fog light but I wrecked it and replaced it with a blue one.


If you do this don't forget which way the LED is facing when you take it off so you can put the new one on the right way.


Hope it goes well!

i should be ok doing them been ino electronics and soldering for a few yrs now and looks a pretty straight forward job.

i will post my finished dials up once they are done

thanks for your help

[Lukus-vtr]

Originally Posted by darren-jay

i should be ok doing them been ino electronics and soldering for a few yrs now and looks a pretty straight forward job.

i will post my finished dials up once they are done

thanks for your help

Yeah it is, last time I soldered was at school, tis pretty straight forward

Your welcome

Look forward to seeing them

[Wvtr]

i just tried this and now my speedo doesnt work... oh dear!

[cam123]

nice work mate mite try it out

[adam19]

do you soldier out the old leds ?

[adam19]

ahhhh i tried to do mine today, wasnt too hard, but 3 blubs dont work and one is the indicator one : looks naff now, the 3bulbs are gith next to each other, i turnt the bulbs around incase i put them the wrong way, and it wasnt that, must of burnt the thing you solder too some how- its the only thing i can think off, grrrrr its soo annoying now i need another set of clocks

[slammed_saxo_vts]

im trying this + taping over the airbag light aswell

[Apostolosnastas]

Thanks for the Guide. I change mine and after some problem that I have that the connection of the socket was but now all work perfect except the kilometer needle. Can you think something? Also o do the trick with the battery.... But nothing..

[1989vts]

looks class cant wait to get my saxo so i can do this nice and simple but makes a big difference.

[TechnoBoy1]

Looks brilliant mate makes a massive difference thanks for the guide

[jakenglish]

i agree it looks very good

[Rhysupply]

Wouldn't it be cool if the dash lights were green on normal beam and blue on full

[dolby20]

Anybody able to tell me if the bulbs required are
PLCC-2 3020
Or
PLCC-2 3528
Thanks

[yorkie]

Great work pal first time i since this lol

[JamieC]

Done this to mine and its so nice. One light keeps flickering due to my poor skills. but when its working its amazing!

[devilsadvocate]

Looks like a cheap mod, my eyesight is shite so better dials is going to help by the look of those pics

[cookiee]

i have blue sidelights and blue interior light, i defo need to do this! looks awesome man!