smooth custom paint job 155.6dB streetbasser saxo (page 92 linear actuator opening bonnet)

[liam_b]

Originally Posted by Lewisb1991

Where did you get that ipod holder from mate?

as steph said i made it my self

Originally Posted by StephanieLouise

Looking good liam Got your amp yet?
How long do u think it will take you to do the leds? have it done for modified nats or torbay cruise?
Keep us posted x

no hopfuly it will be delivered tomorrow.
leds are goig better than i thought got to order 70 leds tomorrow then i will have enough to finish it off so hopfuly have it all wired tuesday night and hopfuly trimed wednesday and all back in.
should have most the big work done for mod nats and torbay cruise

[StephanieLouise]

Originally Posted by liam_b

no hopfuly it will be delivered tomorrow.
leds are goig better than i thought got to order 70 leds tomorrow then i will have enough to finish it off so hopfuly have it all wired tuesday night and hopfuly trimed wednesday and all back in.
should have most the big work done for mod nats and torbay cruise

Ooh that alright then isnt it, you will have all your amps then. Bet the router is making a hell of a lot easier for you?
Hopefully you will have it done for mod nats. So how many leds are going round the front of the wall?
Get some pics up of wat uv done today.
Hope you will be happy with it all once you have finished it all cause you have put loads of time,work and effort into it
Well done x

[liam_b]

Originally Posted by StephanieLouise

Ooh that alright then isnt it, you will have all your amps then. Bet the router is making a hell of a lot easier for you?
Hopefully you will have it done for mod nats. So how many leds are going round the front of the wall?
Get some pics up of wat uv done today.
Hope you will be happy with it all once you have finished it all cause you have put loads of time,work and effort into it
Well done x

yh the router is making every thing alot easyer best tool ive bought in along time. theres 82 leds in the wall i was going to use 150 but i managed to space them apart more than i was going to. just bout to put a update up in a min. just got to upload pics

[liam_b]

well been outside for the last 5 hours finishing the leds panel managed to router out all parts to fit the leds and wiring in. tomorrow ive got to order 70 more leds and some black carpet to trim the panel with plus 10 meters of black power cable to earth the leds 2 the 4 swtiches witch will control color combinations.
pics from today
1st i routed out the 4mm gap for the light to come out of

2nd routed out the 82 gaps for the led wiring to go thru

3rd made the gap for the positive and negative power wires to go thru


4th started fitting the leds and wiring

[Lippy]

jesus christ man thats alot of routering and wiring! Life is far too short but gonna look awsome!
Let me know when you have some illuminated fitted piccys!

[liam_b]

Originally Posted by Lippy

jesus christ man thats alot of routering and wiring! Life is far too short but gonna look awsome!
Let me know when you have some illuminated fitted piccys!

thanks mate yeah alot of routering i have lost my googles so my eyes are hurting from all the saw dust i got in them lol wiring is going to be a pain in the arse but least i can sit in the house and do that bit

hopfuly have it all lit up tuesday and back in wednesday got to make sure i get it all done for thursday as il be leaving for modded nats friday morning so all has to be done and working

[StephanieLouise]

Wow thats alot of work that you have got done and alot of wiring to do lol. Sounds like its all going good.But buy some goggles before you have no sight left .
Hows the wiring going? x

[smiith]

you dont need goggles just squint, i do it at work all the time lol, just dont take your eye of the router, hurts like hell if you get your finger and takes a while for a semi circle of skin to grow back lol

Looking gooood though buddy

[liam_b]

Originally Posted by StephanieLouise

Wow thats alot of work that you have got done and alot of wiring to do lol. Sounds like its all going good.But buy some goggles before you have no sight left .
Hows the wiring going? x

wiring is going good hopfuly have the hole wall wired up for mod nats

Originally Posted by smiith

you dont need goggles just squint, i do it at work all the time lol, just dont take your eye of the router, hurts like hell if you get your finger and takes a while for a semi circle of skin to grow back lol

Looking gooood though buddy

i was squinting but i live about 100yards from the beach so the wind blows it all in my face lol sounds like your talking from experience dremel is the last tool that toke a chunk out of me hopfuly the router wont lol

[Lippy]

Originally Posted by smiith

you dont need goggles just squint, i do it at work all the time lol, just dont take your eye of the router, hurts like hell if you get your finger and takes a while for a semi circle of skin to grow back lol

Looking gooood though buddy

You think thats bad look at the piccy below! I did this without any power tools too Was fitting watercooling parts to my PC and slipped with the stanley knife! Sorry for the small Hijack

[liam_b]

Originally Posted by Lippy

You think thats bad look at the piccy below! I did this without any power tools too Was fitting watercooling parts to my PC and slipped with the stanley knife! Sorry for the small Hijack

haha that looks like it hurt lol my accident was putting dremel grinding disk into the back on my finger didnt get a pic but it went down to the bone and was such a clean cut it didnt bleed lol

[liam_b]

got a prezzie in the post today my 2nd genesis profile 4 amp came with 3x 5m rca leads, 5m of 8 gauge power cable and remote with none of it was needed but will be useful when making other peoples installs. the amp i got today seems to be the newer p4 as it has metal gain nobs and a blue power light insted of the red on my other one.


well had work today so couldnt get much done but got about 20 of the leds wired up cant get the wiring to sit flush as there so much of it. so im going to have route the gaps bigger tomorrow. plus i got the bracing off the back of the box and painted a 2nd coat of pva glue to seal the box more. hopfuly the rest of the leds and carpet will come in the post tomorrow then i can hopfuly get it all finished off wednesday

[Paulp]

Interesting shizzle.

[StephanieLouise]

Ooooo your new amp has arrived you wired it in yet?
Hows wiring going you got it all done yet or still in the process of doing that? You rekon you will have the leds done tonight or by tomorrow? Keep us posted x

[liam_b]

Originally Posted by StephanieLouise

Ooooo your new amp has arrived you wired it in yet?
Hows wiring going you got it all done yet or still in the process of doing that? You rekon you will have the leds done tonight or by tomorrow? Keep us posted x

yh got it in and wired up but cant set it up untill the wall is in. should be loud 600rms on the front end now

[yanziiessaxo]

like the center console mate, where did you get the bits for that, ot did you make it your self?

[liam_b]

sneaky peak

been working the panel since 5pm non stop hoping to get it done by the morning

[yanziiessaxo]

car is mad matee, realy differant , like it

[StephanieLouise]

Woow you have been working on it for aaaages lol is looking good cant wait to see it all finished. Did you get it all done last night?Post some more pics of it up x

[NICK2506]

cant wait to see these LED's fitted....i still dont understand where they are going...is that panel with the leds in going around all the subs, but so that the leds are flush against the sub box?? so that you just see the glow and not the LED itself?