smooth custom paint job 155.6dB streetbasser saxo (page 92 linear actuator opening bonnet)

[Sneakydevil89]

that things going to be soooo loowww, speed bumps look out haha

look forward to seeing this beast again at the weekend.

[Tontsy]

Originally Posted by liam_b

here you go mate these are the ones ive got. yh im still on standerd shocks
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=200351970550

did find one at scrapy today but it started to rain and messing about on oily wet bonnets aint fun so will go back on monday

theres 2 ways i can wire them

1 wire them both up togher +to+ should be ok but some people do have problems with it being like this

or

wire one up to run the engine and the 2nd one up to the system so the system and car are seperate

oh sweet stuff on the springs, im needing to lower my front a lil, could come in handy to save a few bucks
they looking the part ?
but atm im raising my rear around 40mm as my rear beam is getting f***ed from the weight of install and i still havnt put the big yellows or amps in yet!
i have managed to get a 105Ah battery for free and been offered a few for cheapppp!
and plans of making a tunnel install instead! so whilst the rear is stripped looking for a standard R/S beam for discs

hows the ALT installation going ?

[liam_b]

Originally Posted by StephanieLouise

Oooo awesome, is it done yet? cant wait will look luuush lowered on front! x

yh got it all done in about 2 hours replaced the rear engine mount to and it has stoped the nocking noise and stop the car from shaking the car is like a cm lower than befor hopfuly thay will settle down abit if not ive just wasted £100

Originally Posted by Sneakydevil89

that things going to be soooo loowww, speed bumps look out haha

look forward to seeing this beast again at the weekend.

thanks mate will see you on the weekend be ready for a noisey sunday

Originally Posted by tonto_VTR

oh sweet stuff on the springs, im needing to lower my front a lil, could come in handy to save a few bucks
they looking the part ?
but atm im raising my rear around 40mm as my rear beam is getting f***ed from the weight of install and i still havnt put the big yellows or amps in yet!
i have managed to get a 105Ah battery for free and been offered a few for cheapppp!
and plans of making a tunnel install instead! so whilst the rear is stripped looking for a standard R/S beam for discs

hows the ALT installation going ?

thanks mate as said springs dont look 70mm but that could be because thay havnt been on long will let you no if it goes any lower.

id becarefull highering the back as ive found the bars bend alot when thay have weight on them i wouldnt like to think how much my would be bent if the car wasnt lowerd befor the install.

what tunnel you going for how meny subs ect?

[Tontsy]

Originally Posted by liam_b

what tunnel you going for how meny subs ect?

im looking at 8, so, 4 either side then power them with something like a 3000D
but lastnight looking at my fuel gauge now i got 2 batteries in the back, i went through more than a 1/5th a tank in under 50 miles
whats your fuel consumption like?, i can hardly get 300 miles to a tank, when i first got the car i was getting near on 400!

so im thinking not too bother if it wont be able to move anywhere because of the weight!

my Torsion bars have bent like fuck, but im thinking about getting another Beam, standered height, and just using the install alone to lower it now.

[iDaNz_VTR]

niceee mate kit a kit 4 it now

[Tontsy]

ok, i have on offer batteries, i currently have 4 x 126aH 12V batteries...they are mine
but up for sale i have possible around the 30 mark comming, but they will need checking, could potentially have 0

looking at 60 a pop if you know anyone interested, will be checked, fully charged and ready to go!
any interest, let me know and ill get back to you when ive checked it all over and got a final amount.

[liam_b]

Originally Posted by tonto_VTR

im looking at 8, so, 4 either side then power them with something like a 3000D
but lastnight looking at my fuel gauge now i got 2 batteries in the back, i went through more than a 1/5th a tank in under 50 miles
whats your fuel consumption like?, i can hardly get 300 miles to a tank, when i first got the car i was getting near on 400!

so im thinking not too bother if it wont be able to move anywhere because of the weight!

my Torsion bars have bent like fuck, but im thinking about getting another Beam, standered height, and just using the install alone to lower it now.

kl man what type of tunnel you going for like scruffs old one?
faul aint to bad in my car cost me 20 quid to get to ists that was 220 miles daily drive around town i seem to get around 35/40 mpg

the weight problem is the pain in the arse with saxos there max limit is 1220kg im bang on that so i cant put any more weight in the car

Originally Posted by iDaNz_VTR

niceee mate kit a kit 4 it now

thanks

Originally Posted by tonto_VTR

ok, i have on offer batteries, i currently have 4 x 126aH 12V batteries...they are mine
but up for sale i have possible around the 30 mark comming, but they will need checking, could potentially have 0

looking at 60 a pop if you know anyone interested, will be checked, fully charged and ready to go!
any interest, let me know and ill get back to you when ive checked it all over and got a final amount.

what do these batterys weight? chances are if thay dont float around 12.5 around a decent charge thay will be fooked change one over night then leave it off the charger for a cauple hours and if that float about 12.5 there in good nick

let me no how you get on with them i might be able to shift a few

[StephanieLouise]

Originally Posted by liam_b

yh got it all done in about 2 hours replaced the rear engine mount to and it has stoped the nocking noise and stop the car from shaking the car is like a cm lower than befor hopfuly thay will settle down abit if not ive just wasted £100

Ohh cool hows it looking at the moment? Im sure its looking good. And maybe you just need them to settle abit, if still no good after a while id go back and complain x

[liam_b]

looking ok but want it lower but ive just been offerd a full set of hydraulics for a 106 for £800. it's got entire front ram struts with large brakes. rear rams. 4 way displacement rack 4 dump manifold and cast steel headed pump

all moves possible

i need to get saving i think lol

[Seggons]

very fond of the interior
looks mint, you must be pleased

[liam_b]

thanks mate has toke alot of work but yh im pleased with it

[StephanieLouise]

Originally Posted by liam_b

looking ok but want it lower but ive just been offerd a full set of hydraulics for a 106 for £800. it's got entire front ram struts with large brakes. rear rams. 4 way displacement rack 4 dump manifold and cast steel headed pump

all moves possible

i need to get saving i think lol

Lol Ooooh So Is liam tempted to buy it So its something your thinking about getting then?And yes you best get saving if your going to buy it.
Keep Us updated x

[Sneakydevil89]

buy it now and doing the financial stuff later...always been my motto...never really worked though

[liam_b]

Originally Posted by StephanieLouise

Lol Ooooh So Is liam tempted to buy it So its something your thinking about getting then?And yes you best get saving if your going to buy it.
Keep Us updated x

yes im very tempted just need to have a chat with my mate to see what else i would need to make it all work and if its a good idea to be drive 1000's of miles with a hydraulic system. think im going to start to do some epic hours at work to get some decent money

Originally Posted by Sneakydevil89

buy it now and doing the financial stuff later...always been my motto...never really worked though

lol thats how ive always been thats why im skint 99% of the time because soon as paid day comes i spend it all on the day i get it lol

[Sneakydevil89]

Originally Posted by liam_b

lol thats how ive always been thats why im skint 99% of the time because soon as paid day comes i spend it all on the day i get it lol

the easy way of getting round that is not earning enough to buy waht you want haha tahts my problem at themoment, my parts list is about £500 and i got like £150 haha

[liam_b]

Originally Posted by Sneakydevil89

the easy way of getting round that is not earning enough to buy waht you want haha tahts my problem at themoment, my parts list is about £500 and i got like £150 haha

lol my parts list is about 4k think its time to get steph out on the streets earning me money lol

[StephanieLouise]

Originally Posted by liam_b

yes im very tempted just need to have a chat with my mate to see what else i would need to make it all work and if its a good idea to be drive 1000's of miles with a hydraulic system. think im going to start to do some epic hours at work to get some decent money

Oooh cool im sure it would be able to 1000's of miles lol and yes u best start doing some stupid hours at work im sure if you work quite abit at work u shud get the cash in 4-5 weeks?

Originally Posted by liam_b

lol my parts list is about 4k think its time to get steph out on the streets earning me money lol

Lmao thats rude!!!! . I would never do such a thing haha

x

[Sneakydevil89]

Originally Posted by StephanieLouise

Lmao thats rude!!!! . I would never do such a thing haha

x

ill give you 50p and a cookie? haha

[StephanieLouise]

Originally Posted by Sneakydevil89

ill give you 50p and a cookie? haha

Lmao ill go ask my pimp

[Tontsy]

Originally Posted by StephanieLouise

Lmao ill go ask my pimp

ill raise that cookie with a subway meal yo!


the batteries are heavy fuckers will throw some on the scale now and see what it says . . . 26KG give or take a few as these scales are shite! but as im going to weigh a mates car at the tip, ill take one along and see if its any different!
ive got 4 on charge, will be on tonight and ill whack a battery tester on them in work or something!

skim reading, and saw hydrolics ? 70mm springs not low enough?! lol ...