Wiring questions

[Vinootje]

I have a question regarding the wiring for the blinker.

I need to find the front left and front right blinker wire togheter so i can wire a us blinker module. I need to find both wires togheter close from each other

Saxo phase 1 1999 vts 8v

[Spendyrx]

Originally Posted by Vinootje

I have a question regarding the wiring for the blinker.

I need to find the front left and front right blinker wire togheter so i can wire a us blinker module. I need to find both wires togheter close from each other

Saxo phase 1 1999 vts 8v

F4 on the middle section (it's the fuse box under passenger dash of rhd cars) you can most likely take your feed from the wires out of the back of that assuming they are directly linked to the indicators! Best off getting yourself a proper wiring diagram/Haynes manual to trace the wires!

Sent from my SM-A500FU using Tapatalk

[Vinootje]

Originally Posted by Spendyrx

F4 on the middle section (it's the fuse box under passenger dash of rhd cars) you can most likely take your feed from the wires out of the back of that assuming they are directly linked to the indicators! Best off getting yourself a proper wiring diagram/Haynes manual to trace the wires!

Sent from my SM-A500FU using Tapatalk

Thanks alot, sadly i cant see the photo clear enoug.

Some better explanation:
I bought 2 unites US Light module and comming home/leaving home module

US light Module
Which wires are for the front left and front right indicator from the indicator stalk?

Comming home module
I need to find a place where my front left and front right DRL wire's come togheter.

The unit has 2 negative triggers and 2 positive triggers. I heared that saxo's have a negative trigger. Do i need to connect one negative trigger to the lock, and one negative trigger to the unlock?

And a place where both lock and unlock wires are Sako phase 1 vts 1.6 8v 99.

[Vinootje]

i need to know which pins are for the DRL's and both front indicators.

[Vinootje]

Originally Posted by Vinootje

i need to know which pins are for the DRL's and both front indicators.

I already know which wires i need, i connected the US blinker module but that went wrong. i cant install the module before the dash because otherwire my dashboard indicators keeps on and all left and right indicators will be on.

[Spendyrx]

Is there any way you can extend the wires you need and take them up to the plug at the stalk?

Sent from my SM-A500FU using Tapatalk

[Vinootje]

Originally Posted by Spendyrx

Is there any way you can extend the wires you need and take them up to the plug at the stalk?

Sent from my SM-A500FU using Tapatalk

Well the only solution is in the engine bay. splice it in the wire that goes to the bulb of the left indicator and right indicator. the unit it self does not have long wires. It is not my priority anymore. no big deal for not having US module