C2 Inlet - What else would I need??

[VTS_86]

I have been looking at this for my Saxo VTS.
Inlet manifold removed from Citroen C2 VTS engine.

Includes manifold, throttle body, injectors, injector loom, fuel rail and some sensors.

What else would I need to fit this to the Saxo.

[LeeM]

http://www.gmcmotorsport.co.uk/gmc-o.../prod_580.html

[VTS_86]

So if I get the manifold I would need to get that in the link. I take it that just bolts on the end.

[adzvtr]

you got to choices, you can get the at power throttle boddie.
you will need the tps sensor from them 2. modify your throttle cable slightly to fit.

or you could get a bracket made up to fit the vts throttle bodie.

you will also need to drill and tap holes in the head as the bolt holes dont line up on the j4 head.

then you need some way of sorting the fuel return as the c2 fuel rail doesnt have one.
also the fpr needs sorting.
or modify the vts rail to fit.

think thats about it

[VTS_86]

This is what I was looking at. I would just need to source the rest of the bits.

[vtr_chris90]

Oh yer this on eBay?
I spotted it too, but I realised it was the one that sn3ddon (I think is his username) sold on here for about £120-130 , so the guys making a tasty profit tbh lol