What spacers should I get? - Saxperience

30K · 29th April 2014, 06:45

Hi there! I bought my VTS a few days ago and I am total noob about it lol. The thing is I bought a new set of rims but when I tried to mount them the tire bumps into a bolt thats part of the coil. So I figured out the hard way that I need spacers. The rims are 15 inch with 195/45 tires. On the inner side it says that the ET is 4/0. Do you think that 15mm spacers will do the trick?

Those are the rims if you are wondering

Brendan^p · 29th April 2014, 09:30

Minimum you should need if it's ET40 (I guess it was a typo with the '/') would be 20mm if you have a disc axle or 25mm if drum

30K · 29th April 2014, 10:34

Yeah its with 4 discs. No drums on the back. Btw one friend told me that rims with 6.5j and ET40 should fit fine.

Brendan^p · 29th April 2014, 10:45

Quote:

Originally Posted by 30K

Yeah its with 4 discs. No drums on the back. Btw one friend told me that rims with 6.5j and ET40 should fit fine.

I have ET20 on one of my 106's with disc beam and here is how close it sits.

And I've been told the drum beam is slightly narrow so would need the extra 5mm (I believe)

30K · 29th April 2014, 10:54

Thats with ET20 but are the rest of the specs the same as mine? I mean the tire width, etc?

Brendan^p · 29th April 2014, 10:57

They are 15x7 with 195/50's.

30K · 29th April 2014, 12:43

Well ok then mate! I'll go for 20mm spacers. Thanks for clearing this up!