Right then, another small update....
I wanted to remove my sunroof mainly due to the weight but I also never use it and it leaks.
So after a little while reading through a few threads on here, I decided to use a sheet of 3mm black Perspex.
After measuring up the hole in the roof, I ordered a custom cut piece from some guys on eBay. All that was left for me to do was radius the corners.
The sheet when it arrived...
After cutting the corners...
I then proceeded to remove the sunroof; this included the glass, mechanism, plastic surround and I also cut the metal frame out as well.
Then after some measuring, marking, drilling, bonding and a few rivets, I ended up with this...
Very happy with the results, I don’t even notice the difference from the outside
All that is left the do is trim the silicone and paint the rivets black.