Hi Guys,
Some of you may have seen my project thread on SSC however i thought i'd make this thread up for those of you that havent. I'll try and keep the writing brief,
So...
My project started this time last year when i had finished my 2nd year exams at uni and wanted something to keep me busy while on my placement year!
So decided to go abit crazy with the westy, one of the reasons for doing it was the rareity of Mango VTS's around
First decision was to either go for the engine first or make the chassis capable of taking the VTS power. I had just sourced a VTS engine with only 56k on it, single plug ecu so was perfect for my car. Even with that temptation i decided the best way to go about things was to prepare the chassis for the new engine first.
I set about putting a VTS disk beam on the rear, but then found out it was roggered, so decided to investigate how to refurb it
Billies were added all round
New drop links and bushes all round
Then it would be rude not to install bigger brakes and braided hoses while i was at it!
That was stage one complete,
I then went to an RR day in November and she did me proud making 83bhp @ fly with 100k on the clock and just induction kit and de-cat!
This is how she sat for the fast approaching winter months
Keep your eyes out for the next installment