Mobile Devices: Lite Theme CitroŽn: CitroŽn Trader | Saxo Trader | C2 Trader Peugeot: Peugeot Trader | 106 Trader Enthusiast: Saxperience

Go Back   Saxperience - Citroen Saxo Forum > Blogs > Simo' Says...

I intend to use my blog to keep you informed of things happening with my car(s) and anything in life I find interesting, unusual or worthy of sharing! Please check back regularly to see what's been happening in the world of Simo
Rate this Entry

Upgrading the Suspension...

Submit "Upgrading the Suspension..." to Google Submit "Upgrading the Suspension..." to Facebook Submit "Upgrading the Suspension..." to StumbleUpon Submit "Upgrading the Suspension..." to Digg Submit "Upgrading the Suspension..." to Twitter
Posted 26th January 2010 at 21:56 by Simo

July 2004... New Suspension.

My suspension had been creaking, knocking and banging for quite a few months now. I think the problems accelerated after I fitted the Grp A engine mounts, as it made everything so much tighter and also caused quite a few vibrations! The car also seemed far too low... it was only lowered 40mm at the front on Pi springs, but it looked more like a 90mm drop! The suspension must be on its last legs I thought?

I fancied the idea of fully adjustable suspension, height and damping rate, but the kits on the market at the moment seemed a bit expensive for the the quaity of build! So I had to choose between two good quality kits... the Koni adjustable damping rate kit, and the well proven Bilstein suspension kit.

After looking into a few things, it bacame apparent that the Koni kit could only be adjusted off the car, so theres not much real advantage in that! I gave John at GMC Motorsport a call and ordered a full Grp N Bilstein kit, with a pair of his spec, 40mm lowering springs!

Whilst replacing the front and rear shocks and springs I decided to do the job properly and bought replacement wishbones, ball joints, anti-roll bars, shock bearings, shock top mounts and track rod ends. The suspension was getting a real overhaul!

I stripped the suspension down myself and managed to fit the new kit over a few evenings... whilst trying to dodge the pouring rain!

The ride of the car is much, MUCH better now. No longer does the car creak as you go around bends, or bounce out of roundabouts. The ride height has been raised a bit, which makes drivability much better! I've not scraped the front bumper once since... which used to be a daily occurance.

Views 12407 Comments 1
Total Comments 1


  1. Old Comment
    hi what sights did you use for your parts? and how much did it cost you to overhaul it all ?
    Posted 3rd March 2012 at 19:08 by TrevorWest90 TrevorWest90 is offline
Total Trackbacks 0


All times are GMT. The time now is 06:47.