Headlamp wiring

[AndyEds1991]

I suppose this comes under styling, seeing as I want to change headlamps!

Basically, whoever installed my angel eyes(previous owner I assume) has done a terrible job and the wiring is.....pretty difficult to make sense of seeing as they've cut wires/changed wires/used different colours!

Well I want some standard headlamps, but the wiring is so near destroyed I was wondering how far back the headlight wiring goes and how hard would it be to put in new wiring for both headlamps?

Main reason for doing this is I want some Hid's and to mod some standard lights and don't want the wiring looking I've Edward scissor hands in there

Thanks

[J222JRA]

Its part of the intermediate loom.......bigggggg job. Personally id go to a scrap yard and cut the bits out you need......then solder the wires onto your loom.

[ads85]

I'm presuming its on the ph1 you have listed, when whoever changed the lights over only the sidelight wiring should have been cut the rest should be on normal headlight plugs, i expect the wiring goes straight back to the fusebox, you might get lucky tho and find some multiplugs somewheere

[AndyEds1991]

Originally Posted by J222JRA

bigggggg job

Ah bollocks lol! if it's that big I think the scrappy might be the best idea then Thank you......you probably just saved my wiring loom was about to go and have a mooch around hehe just hope i can get everything right on it.....i swear whoever did these angel eyes needs a course in cutting wires.....and how to put them back!!

[AndyEds1991]

Originally Posted by ads85

I'm presuming its on the ph1 you have listed

Oh yeah, would have helped if I said which car!It is the phase 1!

If I'm lucky and there are multi plugs....how hard are they to get to and replace? thanks