| Saxo Engine/Performance If you're interested in tuning Saxo engines, or if you need to know something which is engine related... this is the place for you. |
 |
18th August 2010, 11:25
|
#1
|
|
L-plater
Join Date: Oct 2009
Posts: 35
|
106 Quicksilver Problems
My mrs has a 106 quicksilver which has a problem.
The problem is that when left to idle , it will eventually bog itself down (usually takes a few mins) and cuts out.
Also when driving, sometimes the revs will die and it will cut out, or when you go on the power the revs will die and then all of a sudden come back to life, quite often this is when pulling off roundabouts (quite dangerous).
Ive changed the lamda simply as i had a spare one, but need some ideas of where to go with it.
Please any suggestions folks.
|
|
|
|
19th August 2010, 07:58
|
#2
|
|
L-plater
Join Date: Oct 2009
Posts: 35
|
nobody ?
|
|
|
|
|
19th August 2010, 08:44
|
#3
|
|
Saxperience Post Whore
Join Date: Mar 2003
Location: United Kingdom (England)
Posts: 7,064
|
When was it last serviced?
__________________
Stu QIf in doubt, just repeat the answer to the question....
|
|
|
|
|
19th August 2010, 09:14
|
#4
|
|
L-plater
Join Date: Oct 2009
Posts: 35
|
last 2k miles probably, theres additional info that may help.
It had the exact same problem on the first engine, however this died in a bad way so i ended up fitting a newer quicksilver engine, i have to use the inlet/throttle body and all the sensors off the old engine and the exact same problem is still there, which leads me to presume that its a sensor/ecu related issue.
|
|
|
|
|
19th August 2010, 12:23
|
#5
|
|
Established Member
Join Date: Oct 2007
Location: Swindon
Posts: 1,569
Car(s): Jap Import Supra 3.0TT 430bhp 6sp
|
Clean all the sensors out, if you can replace them as that is where the problem will most likely lie.
Have you changed the fuel filter recently as it may be clogged up with gunk which would also cause this.
Then if it still persists look into plugs, injectors, coilpack
|
|
|
|
|
19th August 2010, 13:34
|
#6
|
|
L-plater
Join Date: Oct 2009
Posts: 35
|
Ive changed the fuel filter, coilpack , injectors are still the same as they always have been. Any sensors in particular to begin with , and things like icv, tps and maf sensor engine specific ?
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 23:11.
|
Linear Mode
