Jeffchiz's project *Back from the dead with a cammed hybrid engine* - Saxperience

jeffchiz · 23rd April 2010, 17:36

Right well I’ve decided to make another thread for my saxo as the last one reached 50 pages of mainly spam lol also my car seems to be getting to a point in its life where I think it needs a new thread as I sounded like a right noob in the first 10 or so pages in the first one lol
Anyways ill do a quick rundown of how the car has changed over the years
I bought her for £750 off ebay was advertised at £1000 I think; only problems were a chipped screen and two balding tires.

First of all I ordered clear rear jewels, angel head lights and French plates from santa pod

Then my mate smashed my rear window (accidently!!!) lol

Then some t**t smashed my front window and bricked the roof (he had to pay out about £600)

De-pinned and de-wipered and t-cut badges

Then tried to smooth the bumpers myself (badly)

Did a photoshop of what I wanted it to look like

Then I fitted -60mm spax spring and tinted the rear lights to look more standard

I then fitted a smoothed boot with a short plate recess

jeffchiz · 23rd April 2010, 17:37

I also part bought a 106 1.4 with the intention off taking the bike carbs, rallye head and 4-2-1 mani on to my vtr

Then I fitted my 4-2-1 manifold

And I had a smoothed, wide mouthed front bumper made up for me

And then bought some rallye steels

And swapped my bike carbs for a rallye inlet

I refurbed my rallye steels

Then I fitted a red and black furio interior and fitted some vibe components and got rid of the 6x9’s

Then I got the boot painted, side strips painted gloss black and I had another rear bumper made up for me (smoothed exhaust recess and tow eye)

jeffchiz · 23rd April 2010, 17:37

It had its mot

and fitted a new cat, 4 brand new yokos, rear brake bias valve repaired and had the torsion bar lowered 65mm

Then fitted a smaller boot plate and fitted another pressed front plate and a 106 back box and a superprint centre section (de-cat)

Saxp stickers!!

Citroen sport badges and smoked side repeaters

Fitted rallye head and inlet

Couldn’t get it working properly so out with the vtr engine and in with the 16v engine with a 1.1 box!

jeffchiz · 23rd April 2010, 17:38

Then fitted a vts mahoosive rad

Some pretty pics

Then bought some Borbet A’s

More bad luck! The gearbox mount snapped sheared off bolts in the g/box and snpped both drive shafts so I replaced the 1.1 box with a vtr box to save on fuel and because I had it lying around lol

Thats how it’s looking at the moment i need to order a couple drive shafts then it’ll be back on the road!
Also my kam racing package turned up: apex front dampers, front and rear maxtorque discs and mintex pads, powerflex and polysport arb/wishbone bushes all these are going to be fitted by KrisB when my car is back on the road. While the car is doing nothing i thought id fit a few things I had lying around, polished cam covers, i cut down my red induction pipe and fitted, fitted my K&N cold air feedand fitted my black bolts (inlet manifold/throttlebody/camcovers/coilpack cover) but ive lost my red coil pack dunno where ive put it!

Current spec
Engine:
-16v engine
-vtr gearbox
-K&N panel filter, K&N cold air feed, red induction pipe and oem air box
-supersprint race center section

Suspension/Brakes
-Apex front dampers
-spax 60mm springs
-Powerflex arb bushes
-polyrace wish bone bushes
-maxtorque frona dn rear discs
-mintex pads front and rear

Wheels/tires
-15”x7” Borbet A’s
-avon z
-zv3 tires

Exterior
-front bumper (smoothed fogs, custom paint)
-rear bumper (smoothed exhaust recess, tow eye)
-boot (smoothed jet wash, spoiler, badges, handle, lock and shorted plate recess
-pressed plates
-Citroen sport badges
-smoke side repeaters
-clear rear jewels
-flat wipers

Interior/ice
-red/black furio interior, plain rear cards and gray front cards
-black a,b+c pillars
-alpine head unit, vibe components in front, co-axials in rear all powered by a sony amp, and jbl sub and amp

Future plans

Bodywork
-repaint front bumper
-fit gloss black mk2 spoiler
-de-badge smooth and spray grille gloss black
-gloss black mirrors
- smooth aerial and paint roof gloss black
-paint the wheel dish red

Mechanical
-fit rear uprated rear dampers
-fit rear beam bushes
-4-2-1 manifold
-some sort of custom back box
-maybe throttle bodies over the summer
-lower torsion bar another 20mm

Interior
-gti rear bench
-raceland front bucket seats
-mk2 digi dial conversion
-gti gear knob

Dan-Subtle^m · 23rd April 2010, 17:40

Wheels are nice

Lovely car this, will certainly look forward to seeing it at the shows this year.

jeffchiz · 23rd April 2010, 17:53

Quote:

Originally Posted by Dan-Subtle

Wheels are nice

Lovely car this, will certainly look forward to seeing it at the shows this year.

lmao get your eyes off them, cheers for comment

hopefully all the bodywork plans will be done by FCS.
I've actually masked one of the wheels up and currently spraying the dish red but im running out of paint so its still looking a bit dark ill get a pic up later for you

jeffchiz · 23rd April 2010, 17:56

old thread can be found here http://www.saxperience.com/forum/sho...d.php?t=224107 picture heavy!

also i have quite a lot for sale just pm me if interested
-vtr interior
-mk1 angel headlights
-mk1 standard rear lights
-vtr engine
-rallye head (might be sold)
-vtr nissens rad

jeffchiz · 23rd April 2010, 18:30

heres a pic of the wheel im spraying, before people say how rubbish it looks, its not finished and they are getting professionally done at some point in the near future this is just so they dont have a blue lip on them and they match my car lol

DanJames · 23rd April 2010, 19:38

Rekon they will look gud when finished m8

jeffchiz · 23rd April 2010, 19:48

Quote:

Originally Posted by DanJames

Rekon they will look gud when finished m8

cheers mate

i hope so!

Jamb0 · 23rd April 2010, 19:55

wheels should look mint with the red lip, great car buddy.

jeffchiz · 23rd April 2010, 22:06

Quote:

Originally Posted by Jamb0

wheels should look mint with the red lip, great car buddy.

you in luck mate heres a pic

lol

also heres a pic of the engine bay with the black bolt, red induction pipe and cold air feed

with the cold air feed i attached it to the end of the original vtr cold air feed i think it should work pretty well!

still need to find my red coil pack cover, then you should see the black bolts much easier! and should contrast good with the red, also i think a red top rad hose is on the cards to finish the bay off along with a good clean

ive also got some more shiny nuts to go in the engine bay eg the three 13mm strut nuts and the big 18mm nut on top of the top mount

kevin37 · 1st November 2010, 13:35

those wheels are amazing! what are they called??

kevin37 · 1st November 2010, 13:55

nevermind read on abit and found out... ooops sorry

jeffchiz · 1st November 2010, 16:03

Quote:

Originally Posted by kevin37

those wheels are amazing! what are they called??

Quote:

Originally Posted by kevin37

nevermind read on abit and found out... ooops sorry

lol were you on about the borbets?

VTomR · 23rd April 2010, 22:10

Wheels suit alot better now. Should have done a layer of primer first though buddy, would have made a big difference. Good job though.

jeffchiz · 23rd April 2010, 22:14

Quote:

Originally Posted by VTomR

Wheels suit alot better now. Should have done a layer of primer first though buddy, would have made a big difference. Good job though.

Thank you mate

yea that first wheel was just a test as i had a little red paint lying around im going out tomorrow to get some supplies so some primer will be on my list! I'm going to do the next three then re-do that one