GUIDE: Fitting a rev counter into a mk1 1.0/1.1

[TrevorRS]

im going to test it out tomorrow hopefully,

would a set of mk1 vtr clocks work?

CHeers
Trevor

[craig_hurst1983]

ok i fitted my new clocks today found it really easy thanks to this guide
and the rev counter works great..

the only two problem's I've got now is that my fuel gauge is now all over the place when i drive??(when i accelerate the fuel gauge goes all the way to empty then when i brake it goes to nearly full) but when im idling the fuel gauge acts normal and shows how much fuel i have..

also i have lost all of my back lights on the clocks I've checked to see if the bulbs have blown and replaced the one's that did and checked and cleaned all the contacts but still no luck

any suggestions I've checked everything i can think of.

[craig_hurst1983]

Originally Posted by TrevorRS

im going to test it out tomorrow hopefully,

would a set of mk1 vtr clocks work?

CHeers
Trevor

hi i think they should work just make sure you get the same age clocks as your car.
Because some clocks have five plugs around the top and the others only have two plugs at the back of the clocks..
Hope this helps