smooth custom paint job 155.6dB streetbasser saxo (page 92 linear actuator opening bonnet) - Page 40 - Saxperience

StephanieLouise · 16th July 2009, 20:11

Cool Get Some Pics Up!

Tontsy · 16th July 2009, 20:15

Quote:

Originally Posted by liam_b

lol yep but at some point i want to get a van so i can go crazy on that

wreey!

i still want a MK 5 Astra Van VXS

although, after the sax i think im going power and speed.
like every other person in the world, only care about the bhp... i do miss the powaaa of my last bike, so fancy car next i think.

*awaits new pics*

Jim-Bob · 17th July 2009, 09:24

Quote:

Originally Posted by liam_b

shsss dont remind me ive got half the install back in now just need to finish off the ports will get some pics up in a bit

Where have those pics got to liam?

I been waiting ages to see them and they're not here

James

liam_b · 17th July 2009, 09:57

havnt missed much mate just been fiberglassing got 4 of the ports in now just need to do the other too and then sand it all down i am going to be carpeting it but dont have enough carpet at the moment so im just going to spray it satin black untill next week will get some more pics of it in a bit on the box

liam_b · 17th July 2009, 15:50

here some more pics of it jim bob finaly got it in and it slids in and out easy just needs spraying then i can clean the car for tomorrow

25hz ports

routed some finger holes so i have somethink to hold onto while i pull them out

ports out

dirty 45hz tuning lol

charging for tomorrow

pjm300 · 17th July 2009, 15:59

that looks really really good, much better than the previous install

really coming along

liam_b · 17th July 2009, 19:34

thanks mate

Lippy · 17th July 2009, 21:28

is that just resin and hardner youve used to hold the ports in place? looks alot better! thought you were going to do a tunnel install? or are you getting better subs before you start it?

liam_b · 19th July 2009, 23:06

Quote:

Originally Posted by Lippy

is that just resin and hardner youve used to hold the ports in place? looks alot better! thought you were going to do a tunnel install? or are you getting better subs before you start it?

yh just resing and hardner thanks the tunnle is still in the making will be in some time augest

liam_b · 19th July 2009, 23:21

had a awsome weekend went to t17 in oxford on saturday drove up with a few lads from ta and one on the lads in a punto lost his sunroof when we where on the moter way luckly the lad behind him swerved out the way befor it exploded on the floor lol he still enterd the competions with his roof coverd in duck tape lol.
i managed to get up there in one piece tryed my 45hz ports and the where an epic fail so back to the drawing bord put my 25hz ports back in and it was fine got 148.2 dB drag then 150.2 propper droppers walked away with 2 tropyhs

after t17 i drove up to wolverhampton stayed in a premier inn witch was a nice change from sleeping in the cold cramped saxo sunday went to bass junkies open day witch was one of the best open days ive been too 1st time ive been and there seemed to have more than some of the small car shows lol that wernt using the normal mic people test with so my scores shot up 154.9 with the doors closed 156.9 with the door open got 1st place there

all in all a good weekend manage to drive 500 miles in the pure saxo with the clutch going got about 20 miles from home went up a hill and the clutch started smelling think its time for my 4th clutch in 2 years lol

Jim-Bob · 19th July 2009, 23:24

Where was t17 held liam?

Never heard anything bout that if i'd of known it was on i'd of come and checked the car out!

James

Tontsy · 19th July 2009, 23:31

156.9 ? lol got to love it!

was expecting to see some major pic up date on some serious tunnel!
good news about the trophys, did you ever get back to jbl about the trade?

iv notcied since ive had the bass in the back, the clutch is starting to become a wanker!

got to be done though!

liam_b · 19th July 2009, 23:37

Quote:

Originally Posted by Jim-Bob

Where was t17 held liam?

Never heard anything bout that if i'd of known it was on i'd of come and checked the car out!

James

was in a field in oxford its a yearly free meet for talkaudio mumbers awsome meet all the big boys in audio turnt up from the sq fairys to the all out nuts spl guys

the next shows that i no im going to are devon car show next weekend then trax in sep

jonesyFX · 19th July 2009, 23:38

well done mate! glad too see the works paid off

lmao about your clutch, probs all the strain from the weight man

Jim-Bob · 19th July 2009, 23:45

Quote:

Originally Posted by liam_b

was in a field in oxford its a yearly free meet for talkaudio mumbers awsome meet all the big boys in audio turnt up from the sq fairys to the all out nuts spl guys

the next shows that i no im going to are devon car show next weekend then trax in sep

Oh ok i'm a member on TA but i dont think i've ever posted on there, but next year i'll make sure im there as its only down the road from me.

Should have the VTS and i'm just starting my boot build

, i'll only be there to look round though as i won't be anywhere near powerful enough to compete.

James

liam_b · 19th July 2009, 23:45

Quote:

Originally Posted by tonto_VTR

156.9 ? lol got to love it!

was expecting to see some major pic up date on some serious tunnel!
good news about the trophys, did you ever get back to jbl about the trade?

iv notcied since ive had the bass in the back, the clutch is starting to become a wanker!

got to be done though!

yh thay used a audiocontrol mic the db drag and prooper dropers use a termlab mic witch are the the mics that are used world wide but i was happy to piss about with the ac mic lol tryed tryed doing 150 @ at 20hz but it seems the lower the hz the more simular the reading is to the termlab mic so i only managed 148.6 at 20

thanks i might pop to bnq sometime this week to get the rest of the wood for the tunnel then il get lots of pics up of me playing around in saw dust lol routers are awsome but so ******* messy lol

liam_b · 19th July 2009, 23:48

Quote:

Originally Posted by jonesyFX

well done mate! glad too see the works paid off

lmao about your clutch, probs all the strain from the weight man

thanks mate think the clutch is more to do with me trying to pull away fast when i have no power lol so i just pull away slowing even tho im revving the crap out the engine lol

liam_b · 19th July 2009, 23:53

Quote:

Originally Posted by Jim-Bob

Oh ok i'm a member on TA but i dont think i've ever posted on there, but next year i'll make sure im there as its only down the road from me.

Should have the VTS and i'm just starting my boot build

, i'll only be there to look round though as i won't be anywhere near powerful enough to compete.

James

kl il make sure i remember you next dont need any thing special to compete some people bass race stock audio at 119.9db i did 149.9 bassrace at t17 only got 146.6 but still walked away with third lol

Jim-Bob · 19th July 2009, 23:58

Quote:

Originally Posted by liam_b

kl il make sure i remember you next dont need any thing special to compete some people bass race stock audio at 119.9db i did 149.9 bassrace at t17 only got 146.6 but still walked away with third lol

Well the set-up i've been given seems to have an under powered amp imo, need to get the model number and do some research on power figures so might give it a go if i can get them up to the full potential.

James

Lippy · 20th July 2009, 01:35

well done bud! wheres devon car show? is that th one with kit cars?