Turbo setup, Can standard ecu be mapped for turbo?? - Saxperience

luthor1 · 26th October 2009, 23:03

GT17 Turbo FTW.

Andy

jsdvtr · 26th October 2009, 23:24

Quote:

Originally Posted by luthor1

GT17 Turbo FTW.

Andy

What car is that from?

manc · 27th October 2009, 08:33

Quote:

Originally Posted by jsdvtr

What car is that from?

They can be had from earlier (00-02) Saab's (petrol)

On my GT17 the hot side is .47 / cold side is .53.

ManC

jsdvtr · 27th October 2009, 09:35

Should i stick with vtr box or get vts to go with engine. Want it to pick up well and have good acceleration. What sort of extra top end would it have adding a turbo? Just wundered as know that turbo give more top end.

AXracing · 27th October 2009, 19:07

Quote:

Originally Posted by jsdvtr

Should i stick with vtr box or get vts to go with engine. Want it to pick up well and have good acceleration. What sort of extra top end would it have adding a turbo? Just wundered as know that turbo give more top end.

Again all depends on spec. Say your running one bar of boost you would not wish to gear it down at all. If you got the gearing correct well over 150mph is easily possible. The old DP car running 1.1 bar hit 160mph before it ran out of gears. These are terrible cars to run at these speeds though even on a 2 and a half mile long airfield that is wider that a football fields you really are taking your life in your hands.

jsdvtr · 28th October 2009, 10:25

Might get this afr guage.
http://cgi.ebay.co.uk/AIR-CODE-MOVEM...item3356ee8e79
Looks nice. Would like a wideband but are abit too expensive atm.