Raunchz: Westcoast S - 07/07/2010 (Page 22) - Parts Pictures and Engine bay Pics - Page 14 - Saxperience

adzvtr · 19th March 2010, 11:22

Quote:

Originally Posted by raunchz

yeh it is bloody close, a couple of books I've been reading have said about the lack or airflow behind the intercooler and it being hot air etc. which seems right to me hence wanting to try and keep the radiator relatively efficient !!!

I think i've been convinced me to got a stretch bolt guage and do the rod bolts that way as opposed to torquing them up - more ££ to add to the list !!

culd u not hire one from somewhere or borrow one from a garage, as it not being needed that often £100 would seem money not well spent, i might have a sollution if i get one??

raunchz · 19th March 2010, 11:23

Quote:

Originally Posted by adzvtr

culd u not hire one from somewhere or borrow one from a garage, as it not being needed that often £100 would seem money not well spent, i might have a sollution if i get one??

Yeh I'm not sure about it - I might just bite the bullet and get one from the US which is a bit cheaper or find a local engine place and see if I can 'rent' it from them.

Will see I think

adzvtr · 19th March 2010, 11:27

Quote:

Originally Posted by raunchz

Yeh I'm not sure about it - I might just bite the bullet and get one from the US which is a bit cheaper or find a local engine place and see if I can 'rent' it from them.

Will see I think

Im gunna speak to snap on on monday see if they do them.
if they do it will be on my account, when it comes to you needing to use it, i could post it out, and when done u post it back, ???
my m8, will use it a fair bit so worth getting for me,as he helps me out.

raunchz · 19th March 2010, 11:29

If you get one then I'd definitely give you some cash to rent it for a week ! That'd be awesome if you could - would owe you one !! I'll hold off sorting one out/buying one until summer.

I won't need it until after FCS, then it'll be go go go to get the engine stripped, machined and build back up !

adzvtr · 19th March 2010, 11:37

will do that, will know by monday m8, so will let you know. im just awaiting the old wage packet now, then can get headgasket and cam belt kit sorted, then engine can be put back together, and then the fun bits can be ordered.

raunchz · 19th March 2010, 11:38

Quote:

Originally Posted by adzvtr

will do that, will know by monday m8, so will let you know. im just awaiting the old wage packet now, then can get headgasket and cam belt kit sorted, then engine can be put back together, and then the fun bits can be ordered.

Sounds awesome !!!!

S8TTG · 19th March 2010, 20:28

Was thinking earlier.. and i think a procomp kevlar bonnet would be the icing on the cake for yours and then get your leggera's done in matt black to match your morrettes and hi specs!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

raunchz · 19th March 2010, 20:32

Lol I can't afford that procomp bonnet!!! If I could I would!!

Got to save for the baffled sump and the big Citroen order for engine parts and machining after FCS!!

Can't wait to build up the engine!! Will have to enjoy this na engine before it's pulled apart and parts sold!

Mochachino · 19th March 2010, 20:36

Quote:

Originally Posted by S8TTG

Was thinking earlier.. and i think a procomp kevlar bonnet would be the icing on the cake for yours and then get your leggera's done in matt black to match your morrettes and hi specs!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I Agree with this, come on Ross some pressure on you here

raunchz · 19th March 2010, 20:37

Lol, I can't just magic up 375 !! If I could i'd have a nice supercharger by now!!
That's a clutch and radiator for me!!

S8TTG · 19th March 2010, 21:03

...... would look perfect with that kevlar bonnet.. maybe worth a cheeky low offer just incase

raunchz · 19th March 2010, 21:32

Even if I could afford it, Grimsby is over 2hours away from me!!

It's just not meant to be, sorry guys!!!

xxo0pko0xx · 19th March 2010, 23:22

What Kevlar bonnet is that?? I pratically live there and never seen a sax with Kevlar bonnet :s. unless it's off a yellow westie??

raunchz · 20th March 2010, 05:40

The one in the for sale section

xxo0pko0xx · 20th March 2010, 16:48

havent seen it

ill have a nosy

raunchz · 14th April 2010, 21:11

Little Update (Apologies, the pics were taken on iPhone)

S8TTG put my track tyres on my old alloys so have put them on the front of the car to have a try out - they are 195/55/15 and seem to not rub at all and feel great on the road - obviously can't push them hard though.

Fitted new injectors seals and filter buckets to the 16v injectors - one of the seals had pinched in the past, only recently noticed it so replaced all of them:

Old (put them back in the packet the new ones came in)

(Can see the one that had got pinched, didn't leak but with Tb's I didn't want to risk it at all)

Old vs. new filter buckets

Have been reading up about headwork and reading various bits online so thought about having a go myself trying to get a nice diameter port/shape - not gone too mental with the die-grinder, around 14hours later I have a nicely ported JP4 head, still undecided about the wall finish inlet side, left it slightly rough but I somehow feel it should be rougher like the oem casting, exhaust side is smooth.

I've left the actual inlet and exhaust faces oem so I can match them ot inlet and exhaust manifolds at a later date.

The picture is pretty bad tbh (bloody iPhone) but gives you the idea:

Oem vs Finished (may need to play with the inlet wall finish)

time for a beer

Other than that not been upto much tbh, the cars booked in on an rr day next weekend, and I have an S1 box to fit to it to make sure the box is all good (re-cased into a Westcoast case due to S1 casing cracking) - so that'll be going on this weekend, fingers crossed it goes all okay.

Car's running very well, I'm looking forward to finishing exams, have penciled in the day after FCS to pull the engine out and get underway with the Boost conversion!

Toad · 15th April 2010, 01:05

Nice to see a little progress bud.

I'd be real careful with the porting. From what I know, and it's very little, you can easily do more harm than good.

raunchz · 15th April 2010, 08:51

Quote:

Originally Posted by Toad

Nice to see a little progress bud.

I'd be real careful with the porting. From what I know, and it's very little, you can easily do more harm than good.

Cars taking a back seat over the next couple of months with uni finals so progress will be minor.

Yeh I wasn't sure about porting it, but from looking at the oem inlet and exhaust shapes you can immediately see where improvements can be made, especially in the valve throat inlet side

Books give rough port sizes based on valve size so what I've done won't be anything radical, I havnt removed a lot or veered away from the oem shape a huge amount, should be good with boost

It only cost me time so any improvement when boosted will be good - I just need to find out about how best to finish the inlet side surface to help air/fuel mix, especially with around 630cc injectors

There is method to my madness, I'm no Stevie Wonder with a due grinder

jpsaxo · 15th April 2010, 12:18

Good to see you around again mate, i guess you've been busy with uni stuff?

Updates looking good, bet you cant wait to get the boost conversion underway!

vtrsarah · 15th April 2010, 12:24

i dont know much about the mechanical mods loool but the cars looking sweeeet hunny