smooth custom paint job 155.6dB streetbasser saxo (page 92 linear actuator opening bonnet) - Page 23 - Saxperience

liam_b · 3rd April 2009, 02:30

Quote:

Originally Posted by Lippy

looks much tidier in the back there now! good effort! enjoying wiring resistors yet? I did tell you it would be a pain in the arse! even more of a pain when 1 led goes and you have to pull the lot out just to replace 1 led! that drives me nuts!

thanks mate still a little more tidying to be done but ive hide all the wires that i can. ive bought the prewired leds so wiring aint to bad it just mounting them all in the right spot that is going to be a pain

de51_Hodgey · 3rd April 2009, 11:53

i think its safe 2 say u are a ice god

unbelievble how much work has gone into it
well done mate

liam_b · 3rd April 2009, 12:24

Quote:

Originally Posted by StephanieLouise

Looking good, not much work left to do now right?
When u going to have the leds done for?

thanks umm gotta get the doors finished for next weekend so doubt il have the front of the wall lite up but i will proberly have the amps lite up buy next weekend

Quote:

Originally Posted by de51_Hodgey

i think its safe 2 say u are a ice god

unbelievble how much work has gone into it
well done mate

thanks mate still more work to go into it tho

wingswest · 3rd April 2009, 13:02

Looks and must sound mental

greenman · 3rd April 2009, 21:44

Just watched your vids! Woah! Bet she doesn't need a vibrator!

liam_b · 4th April 2009, 20:05

Quote:

Originally Posted by greenman

Just watched your vids! Woah! Bet she doesn't need a vibrator!

lol so true lol

AlexB^p · 4th April 2009, 20:28

what was it 33 herts or something for the pink note lol

liam_b · 4th April 2009, 20:33

Quote:

Originally Posted by Alex-VTS

what was it 33 herts or something for the pink note lol

haha yep 33hz in the pink note but i found out that 25hz works if the girl has a piercing down there

AlexB^p · 4th April 2009, 20:41

niiiiiiiiiiiiiiiiiiiiiiiiice

Lippy · 4th April 2009, 23:18

wow this thread just turned into a dirty one! and stephanie hasnt commented yet.... wonder what she has to say on the subject lol

33hz works at its best when the vechicle is loaded with 15's and the seats are pretty much solid wood!

stevie_m · 4th April 2009, 23:24

looks very nice indeed

StephanieLouise · 6th April 2009, 22:19

Lmao wats this thread turned into. 33hz ftw

-Alex- · 6th April 2009, 22:45

Quote:

Originally Posted by StephanieLouise

Lmao wats this thread turned into. 33hz ftw

Impressed

liam_b · 8th April 2009, 00:00

got some goodies in the post today

heater blower
1m of 0gauge
4x 0gauge terminals
2x 4gauge terminals
1x 3m rca lead
14x 360kohm resistors
2x 14 pin sockets
3m of 2x3" timber
and 30 blue and red leds

1st job of the day was get the new heater blower in 7 months without heating sucked so now its the summer i thought i would get around to fixing it

getting the old one out was a pain in the ass lots of swearing and a big hammer was used lol putting the new in wasnt hard as i was expecting but i did manage to bruise my thumb up and got a huge bit of crap in my eye witch left me working with my eye close for about half an hour lol but manage to get it in and it its all working

2nd job was making the pfm modules for the epicenter and the matrix i used 360kohm resistors to give me 20hz cutoff was a fiddly job but didnt take to long

3rd job fitted more leds to the template have used about 25 leds and its only around 20% so think its going to take about 150 leds to go alway around the subs

4th job was started making the 0gauge leads for the 4th battery
my goodies

pfm,s

tomrrows jobs are paint inside of box with pva glue
fit more 2x3" to the back of the wall
fit the last rca lead
paint the door build
and pack even more loft insulation in

Lippy · 8th April 2009, 00:35

left insulation? not inside the box? oh iirc your using that to fill the gaps around the outside of the box?

That stuff makes me itchy as hell! horrible shit! lol

led's seem to be coming along! should look good when its done!

liam_b · 8th April 2009, 00:54

Quote:

Originally Posted by Lippy

left insulation? not inside the box? oh iirc your using that to fill the gaps around the outside of the box?

That stuff makes me itchy as hell! horrible shit! lol

led's seem to be coming along! should look good when its done!

lol na not inside just around the sides and on the top to seal it off abit better

yh makes me itch like a bitch too

leds are going to be hell ive got to staple every led in place then put a block of wood inbetween every led then wire it all up

liam_b · 8th April 2009, 23:59

well todays been a stressfull day have had tooth ache and ear ache all day so that hasnt helped

but got quite abit done

1st job was take all the subs, ports and crossovers out then take both front panels off once all that was off i started painting the inside with pva glue nerly a litres worth.

2nd job i braided the wiring for the 4th battery and wired it up

3rd job i sprayed the door pod. i was going to get it perfect for ists but i coudnt be arsd getting the filler out today as i felt like crap

last jobs where put more 2x3 on the back of the wall and pack even more loft insulation down the sides got both of thos done then started putting it all back togther but it got dark so i called it day

StephanieLouise · 9th April 2009, 13:47

lol thats alot of glue!

How long did it take to dry?
Hows all the work going? U nearly ready for ISTS? x

Karl · 9th April 2009, 13:48

so you've turned your 1.1 into a van?

liam_b · 9th April 2009, 22:27

Quote:

Originally Posted by Karl

so you've turned your 1.1 into a van?

yh a van that you cant fit any shopping in lol

only a small update with no pics got every thing back in today was a pain in the ass to get the ports back in but got there in the end all the subs back in and all wired up didnt manage to give the car a decent polish tho will get some scores and pics updates on money

if any of you going ists come say hi