smooth custom paint job 155.6dB streetbasser saxo (page 92 linear actuator opening bonnet)

[stu-n-shell]

van it mate with a vt kit will look insane. dont van it the way you have in the photoshop id have the windo replaced with a matal panel and not smoothed in to the quarter panel looks a bit to flat looking that way.

[liam_b]

Originally Posted by StephanieLouise

Photoshop pics look really good. You should defo van it
Hace u started the mdf roof or anything yet?

x

thanks

at the moment im finishing the boot will have the rear back window boarded up and trimed so if anyone puts my back window thru thay will meet a 18mm ply board plus with the board on means i can start my tv project

think for the time being mdf roof is on hold as it will put me in a higher category in db drag just hope my sun roof can handle the next cuple months as ive got about ten shows to go to

[Tontsy]

Originally Posted by liam_b

thanks

at the moment im finishing the boot will have the rear back window boarded up and trimed so if anyone puts my back window thru thay will meet a 18mm ply board plus with the board on means i can start my tv project

think for the time being mdf roof is on hold as it will put me in a higher category in db drag just hope my sun roof can handle the next cuple months as ive got about ten shows to go to

tv project, i like!
i had a 150" cinema projector in mine a few months back!
you looking for TV or some kind of projecter for it? ... i got mine cheap off a mate could find out if hes got any left if your interested.
was a right laugh, parking up in levels and splattering some lee evans on the wall

[stu-n-shell]

not the best chop but kinda like this

[Andy_VT]

van it mate.. looks well good !

[liam_b]

Originally Posted by stu-n-shell

not the best chop but kinda like this

ummm good idea alot easyer than welding it up might get my mate to copy a saxo rear window in metal and get it sprayed to see what it looks like

[liam_b]

woop woop should have my 2nd genesis p4 tomorrow ebay ftw

[liam_b]

Well i started making the lighting panel today


This ring will go round the subs and the leds will be hidden underneath it.

I still need to cut out the middle bit from this bit of wood for the ports.


Should i retrim the lighting panel black to go with the rest of the box or red?

[Xsi16v_Jk]

Very different go 4 it

[Sneakydevil89]

wanna see this one again soon always different.

[liam_b]

Originally Posted by C20XE_Jk

Very different go 4 it

thanks

Originally Posted by Sneakydevil89

wanna see this one again soon always different.

thanks mate you going torbay cruise end of this month?

[liam_b]

well been out side all day cutting away thinking about how im going to achieve the ideas i have in my head finaly got the panels the way i wanted them. still havent decided weather to use some red carpet or not think il trim it in black 1st then once i get bored il change it to red. heres some pics of how its looking at the moment routing the the gaps for leds and wiring will start tomorrow i really aint looking forward to it lol




how it will look when i need 45hz tuning



todo list for tomorrow is
:fiberglass the 25hz ports into the panel
:router a flare on the ports
:fix the rear windows
:try finaly finsih the door pod then retrim the door card
:sound deadern under the carpet
:finish off rear window trim panel
: plus try sort out the rear lighting

[Lippy]

do the carpetting black imo! red might be a bit much? or maybe red in the middle only??? or is that what you were suggesting?

Considered fibreglassing round corners inside the box to eliminate dead spots? might give you a tiny amount more on the spl meter, plucking at straws but its proven to work, what difference it will make though might be minimal!

[chrissawyer21]

if you made it into a van you regret that decision majorly... use limo tint window tinting instead

[liam_b]

Originally Posted by Lippy

do the carpetting black imo! red might be a bit much? or maybe red in the middle only??? or is that what you were suggesting?

Considered fibreglassing round corners inside the box to eliminate dead spots? might give you a tiny amount more on the spl meter, plucking at straws but its proven to work, what difference it will make though might be minimal!

did think about doing the middle red and the outside black but the red and blue leds wont show up as nice as thay do on the black carpet

have thought about fiberglasssing the corners ect but i need to keep the install so it can be put in another saxo if need be so fiberglass is a no go but i have been thinking about putting some rounded bits of wood in the corner that can be screwed in.

[Lippy]

wood would work just as well but just a bit heavier, suggested Fibreglass as I know your trying to keep the weight down!
Have you seen what ive been doing to mine recently? Im now a member of the 2 seater club too! lol

[liam_b]

Originally Posted by Lippy

wood would work just as well but just a bit heavier, suggested Fibreglass as I know your trying to keep the weight down!
Have you seen what ive been doing to mine recently? Im now a member of the 2 seater club too! lol

wouldnt be much weight prob 1 or 2 kg max. just had a look at your thread looking good will have to have a listen once done you going torbay cruise end of this month?

[liam_b]

well had work today so didnt get as much as i wanted done. toke me 3 hours do get the marking up done for the leds was going to be using 150ish leds in the wall but i manage to cut that down to around 100 every line on the board will be an flushed led. got to router out all the lines tomorrow.

started on the port system too need to fiberglass them in tomorrow
then carpet the board hopfuly it should slide in and out with ease but not have any air leaks

[Lewisb1991]

Where did you get that ipod holder from mate?

[StephanieLouise]

Looking good liam Got your amp yet?
How long do u think it will take you to do the leds? have it done for modified nats or torbay cruise?
Keep us posted x

Originally Posted by Lewisb1991

Where did you get that ipod holder from mate?

He made it himself