News : shell's Posi Desire Progress. sold

[stu-n-shell]

the cars not finished yet but thought it was about time i did one of these so here goes.

this is not our car but wat it looked like wen my girlfriend got it for her 18th birthday one lady owner with just motorway miles and full citroen service history.





then we went mad for a short period of time and fitted lexus lights.lol

we got 16" bk's lowwered it 35mm fitted a peco s/s back box k and n induction kit ecotec valve you cant see it in the pic but its there and then we fitted a dimma grille with white mesh.the mesh is notto every ones taste but i like it.



it pretty much stayed like that for a few months then on ebay i got a vtr kit minus the bumper for £100 and the work had an old vtr bumper lying around so i aquired that.after that we struggled to get a back bumper for a while then i found one on ebay for £30 with an ibiza splitter on it.while we waited for money to get it painted i smoked the front lights and fogs and tinted the windows got good discount at tint haus cause a mate works there.

so it was time for the vt kit to be fitted blagged a mates workshop for a weekend cut flared and sealed the kit on. ripped the interior out for a new instal painted bits of the dash and fitted the corbreu forza sport buckets heres how it looked in the worshop.






































its currently at a mates getting painted a new exhaust quick shift and xsport gear linkages fitted then wen we get it back theres a set of smoked rear jewels going on, t cutting the rear badges then its off to our local radio shop for a custom install to fill the hole were the rear seats used to be. will update soon as the car is finished hopefully in the next few weeks as always comments are welcome .

[Saxy1]

looking good.

[stu-n-shell]

thanks took a while getting there but itl soon be looking good heading for louding castle in june wen its all done

[Adum]

looking good so far.

looks like you've put a lot of work into it! is the car going for a full respray? or just the kit?

[stu-n-shell]

every thing apart from the roof just about there was a few dents in the quarter panel and wing that needed done

[Aly]

Lovely mate. I wish I did this now. Just bought say a Silver 1.1 and made it look like a two tone. When your out cruising and not hammering it you'd love something economical that looks good.

Keep it up.

[stu-n-shell]

thats exactly what i want people say why didnt you just buy a vtr but i want something that looks rwaly aggresive but doesnt cost alot to run just doing a few engine mods like the shifter and induction kit if i go serious with engine putting a xsara vts engine in it.

[xxxvickxxx]

looks good so far

[sharpie]

looks like lots of work going on

what car is your gear knob from?

[stu-n-shell]

thats a stadard desire one its got a blue and white sparco knob and gaitor now

[stu-n-shell]

just got the call my mates done with the car at his garage so i will be straight down there tomorow wafter work to pick it up then some pics will be geting taken

[stu-n-shell]

also just ordered my saxp sticker wheres the best place to put it do you guys think its the small oval 1 so thought about the bottom right hand corner of my tailgate

[saxokid100]

Looken good matey!! lots of nice hard work....

[stu-n-shell]

pick car up from my mates the night cant wait got my saxp sticker to day aswell so thatls be going on then some updated pics at the weekend if its good weather.wats people thoughts on shopping list down the door edge was a thought but not sure

[S1AN3Y]

yeah sax-p sticker will look good not a fan of the shopping list matey surpose its not to bad if you actually have the stuff on/in the car instead of just having the stickers and putting them on


like my car is lowered with gmax kit so i have a tiny sticker on my sunstrip that isnt that bad that says gmax but when plasted in stcikers looks abit chavvey lol

the work that you have done looks good shall keep watching this thread to see how it turns out

[stu-n-shell]

cheers i used to work as a panel beater so that knowledge came in handy for fitting the kit and a mate for painting it i work as a sighn writter now so was gona make them my self with a chrome edge and black inlay only gona use brands thats on the car.

[S1AN3Y]

sounds like you have a fair amount of expereince then buddy nice to have a project that you can relate with lol

as for the stickers totally your chose at the end of the day if you like it do it haha if you put them on then dont like them you can always take them off no harm in seeing what they look like

[saxobenvtr]

looks smart mate

[stu-n-shell]

heres a small update now the car is back from paint i spent this morning taking out the rear seats fitting our new buckets and fitting the dash back together now were just waiting on our blue sparco harneses and a couple of hundred quid a mate is due me then it can get the install done.























hope you like the progress were realy happy with how its turning out heres a video of the exhaust but the sound quality of the digital camera is crap lol

[stu-n-shell]

forgot to say i also put my sax-p sticker on 2