Stokesy 16v vtr going back to standard but will see the track again

[AndySAXOp]

Yer I already worked that out dude, thanks

[stokesy]

Originally Posted by AlexB

Probably the switch above the pedal for the lights

yea andy had a play, fixed them.. then they stopped again :/

[hard_corejoeboy]

Originally Posted by AndySAXO

Tryes are fucked.... Pads are very low on the front..... Inner hater on the drive shaft gone. Brake lights need sorting.

I thought the pads were low on the rear?
The brake light is deffo that switch as i had a play with it and it worked since you left..

[stokesy]

Originally Posted by hard_corejoeboy

I thought the pads were low on the rear?
The brake light is deffo that switch as i had a play with it and it worked since you left..

i havnt looked at them mate, i trust what andy says, not gna cost much for replacing them all tbf, get them all bled too.
and yea he had a play, they were fine, then stopped again, think he gna look for a new switch.. they wernt working at top of the road (where the garage is), its no bother mate, just 1 of those things

[AndySAXOp]

Yer all the pads are low, but fronts are very

The front tries are very very low....

[hard_corejoeboy]

Yes indeedy thats why i gave him them spare alloys with the tyres on

[stokesy]

Originally Posted by hard_corejoeboy

Yes indeedy thats why i gave him them spare alloys with the tyres on

just had a read through your progress thread..
you and andy spoke on ther a bit lol..
saw u purchased a kam racing exhaust.. and then you said it wudnt fit??
any ideas why? as have a supersprint backbox on the way, and on the look for a centre section

[hard_corejoeboy]

Originally Posted by stokesy

just had a read through your progress thread..
you and andy spoke on ther a bit lol..
saw u purchased a kam racing exhaust.. and then you said it wudnt fit??
any ideas why? as have a supersprint backbox on the way, and on the look for a centre section

No idea why mate. It had a standard manifold on and a mk1 CAT and i bought a mk1 supersprint system with centre silencer and kam racing backbox and the supersprint centre seemed to fit fine as in it looked like it fitted well but when trying to fit the backbox it seemed as though it just wasn't designed to fit a saxo at all...

[stokesy]

Originally Posted by hard_corejoeboy

No idea why mate. It had a standard manifold on and a mk1 CAT and i bought a mk1 supersprint system with centre silencer and kam racing backbox and the supersprint centre seemed to fit fine as in it looked like it fitted well but when trying to fit the backbox it seemed as though it just wasn't designed to fit a saxo at all...

strange, so it wasnt the centre to mani, was the backbox to centre???
ahh well, have a backbox on the way, just trying to find a centre section, whenevre u want 1 thers none to be found, nightmare :/

[lwigmore]

Originally Posted by stokesy

strange, so it wasnt the centre to mani, was the backbox to centre???
ahh well, have a backbox on the way, just trying to find a centre section, whenevre u want 1 thers none to be found, nightmare :/

Just buy a new one from Kam themselves jamie, much easier

Also that's strange, backbox not fitting the centre section

[stokesy]

Originally Posted by lwigmore

Just buy a new one from Kam themselves jamie, much easier

Also that's strange, backbox not fitting the centre section

have been looking, may just have to.. but much more expensive too :/
will see if anything comes up..
and yeaa, but remember when me and you tried swopping bacboxes over mine had that strange adaptor thing :/, maybe thats what was missing??

[lwigmore]

Originally Posted by stokesy

have been looking, may just have to.. but much more expensive too :/
will see if anything comes up..
and yeaa, but remember when me and you tried swopping bacboxes over mine had that strange adaptor thing :/, maybe thats what was missing??

Yeh but mine didn't fit yours as it had a different flange on it i found out, as my SS 2" backbox fits my SS centre pipe easily,

Just sounds really strange,

[stokesy]

Originally Posted by lwigmore

Yeh but mine didn't fit yours as it had a different flange on it i found out, as my SS 2" backbox fits my SS centre pipe easily,

Just sounds really strange,

yours did fit the centre section fine..
it just didnt fit my car as needed the 3rd hanger thats all..

[lwigmore]

Originally Posted by stokesy

yours did fit the centre section fine..
it just didnt fit my car as needed the 3rd hanger thats all..

No i did further looking into it and the flange was different slightly, that's why it sounded like it was blowing sometimes

But i sorted my SS system out earlier, got my mate to follow me and hello flames it's down to my overfueling problem but who cares

[Josh-VTR]

Nice Jamie.
Andy how many cars have you got at yours now aha!

[stokesy]

Originally Posted by Josh-VTR

Nice Jamie.
Andy how many cars have you got at yours now aha!

quite a few, and johns going in tomoz too lol..
u need to start your shitbox project!!!!

[hard_corejoeboy]

Hows my girl getting along?
She's been replaced with a 1.4 106 lol
Oh and i think have the cambelt cover at mine Doh!

[stokesy]

Originally Posted by hard_corejoeboy

Hows my girl getting along?
She's been replaced with a 1.4 106 lol

you got a quicksilver??
surely thers gotta be some plans??
she's still at andys, im out country mon til wed so he's getting it ready for when get back
picking up new driveshaft tomoz, then all parts should be ready and just gotta be put on the car then all good to go ..

u thought about popping down to snetterton on 17th aug??
the sax will be ther , as a viewer tho

[hard_corejoeboy]

Nah mate a nice 106 XR lol
5 door as well complete with grandad interior!

52000 miles 1 owner and £725

[stokesy]

Originally Posted by hard_corejoeboy

Nah mate a nice 106 XR lol
5 door as well complete with grandad interior!

52000 miles 1 owner and £725

noooo, that sounds dreadfull lol..
bet saving you a fortune on petrol, insurance etc..
wnt be winning many races in it tho