M5TYJ - New car time, Audi TTS - Page 6 - Saxperience

MJ05LLY · 2nd July 2010, 23:10

Quote:

Originally Posted by raunchz

urmmmmmmmmm prob magnex centre tbh - stainless exhaust is worth fitting over a mild steel one

Cheers again

Im not buying anything for my engine without your permission from now on

MJ05LLY · 4th July 2010, 12:54

Quote:

Originally Posted by auds

haha

I know this guy at Powerflow, Phil, who could most probably make it fit

mind you long way to travel I suppose haha.....but he is brilliant and can do just about anything I reckon and is very cheap too

he only charged me £5 to fit my new cat

hehe

Where did you fit your cat? Poor thing!!!
Hopefully ill have it fitted mid week so ill have some pics up

Nothing much happened this weekend, just purchased abit of 'skinz' sound deadening

MJ05LLY · 6th July 2010, 18:28

Well today Ive had some more movement

Shes up on the ramps

MJ05LLY · 6th July 2010, 18:31

now we have a fitted exhaust. After abit of chopping i have a supersprint centre with decat and silencer and Magnex backbox

Overall happy with it. Not loud at all. Cant notice when am in the car or at high revs. But when outside its a little noticeable.
Time to get the car all clean again

Also today i have purchased some Brembo v6 callipers and some audio sound deadening

3cott · 6th July 2010, 18:57

Looks good

MJ05LLY · 7th July 2010, 12:41

Quote:

Originally Posted by 3cott

Looks good

Cheers bud, finally get a exhaust fitted after being lazy for so long

auds · 7th July 2010, 13:00

Quote:

Originally Posted by MJ05LLY

Where did you fit your cat? Poor thing!!!
Hopefully ill have it fitted mid week so ill have some pics up

Nothing much happened this weekend, just purchased abit of 'skinz' sound deadening

Phil at Powerflow in Stafford lol

and yes still is poor thing haha....I need to get that carrier off it!!!!!!! lol

I've got some sound deadening stuff too, not yet put it lol

Exhaust looks good

MJ05LLY · 8th July 2010, 07:39

Quote:

Originally Posted by auds

Phil at Powerflow in Stafford lol

and yes still is poor thing haha....I need to get that carrier off it!!!!!!! lol

I've got some sound deadening stuff too, not yet put it lol

Exhaust looks good

You done anything to your car yet?

I hear a rumour that ive put a cheeky deposit down on some Ph3 cams

auds · 10th July 2010, 13:41

Quote:

Originally Posted by MJ05LLY

You done anything to your car yet?

I hear a rumour that ive put a cheeky deposit down on some Ph3 cams

cheeky deposits are good lol

Erm

I washed it lol

I went to the bodyshop yesterday, looks like next weekend will be having the rockercover, wheel and drivers mirror re-done....the paint has come off!!!!!! Obviously he didn't prep it...but it is a good thing really, as that's the one the bus hit so at least I get it re-done for free woop woop

Be glad when it's all done though and the stress is over...he best not balls up this time, or I will be getting my money back!!

So what else you been putting cheeky deposits on hehe

makindue · 10th July 2010, 14:47

Hi MJ05LLYp, I have the same problem. How can we deal with it?

MJ05LLY · 12th July 2010, 10:31

Quote:

Originally Posted by makindue

Hi MJ05LLYp, I have the same problem. How can we deal with it?

???

This weekend i havnt done anything on the car, i missed out on a manifold which was silly of me, too busy watching the F1 and on Sat i went down to Rothervalley to show my face and meet some of the Sax-p lot for the first time

MJ05LLY · 15th July 2010, 21:01

A little trip down the road and a new pressie for the car

The 106oc does come in handy for some things

Abit of TLC tomorrow at work and it will be all good. Clean it down, some red oxide followed by some hi temp spray and she will look all good!
Then next week i may get it wrapped!!!

MJ05LLY · 15th July 2010, 21:01

A cheeky lil pic from Sat's meet

toxic · 30th July 2010, 21:40

Quote:

Originally Posted by MJ05LLY

Then today i decided it was time to go for the bigger brake set up fitment.

Bigger Vs Smaller

Dont you just love the soft locating socket! NOT. Had to grind them out!!!!!!

I got some goodridge braided hoses, but they didnt have no fittings on the ends

Then back on the wheels

Happy enough with this weekends work load

hi there why do you have to grind that bit off i have the same 1s wont fit disk hitting carrier when done up is this why you ground off that bit ?

MJ05LLY · 30th July 2010, 22:32

Quote:

Originally Posted by toxic

hi there why do you have to grind that bit off i have the same 1s wont fit disk hitting carrier when done up is this why you ground off that bit ?

Just to fit on the hub otherwise you cant bolt it in correctly

MJ05LLY · 12th August 2010, 19:32

After a while of no updating i thought id pull my finger out. After going on a nice little work trick i came back to a poorly car. I noticed the radiator was now leaking so it was time to change for a nice new one

OLD

NEW

MJ05LLY · 12th August 2010, 19:34

One random day i finished early and i decided it was time to add smoked headlights to the car which was fun dodging the rain

Off the originals come, to be replaced by

Need to get some pics of them actually on the car, when i manage to get it all washed and cleaned up

MJ05LLY · 12th August 2010, 19:37

Then at the weekend i managed to finally get my manifold fitted
What a ache that was, getting some of those bolts.

The only thing i am worried about is how close the mani is to the alternator and cable. But other than that the car seems less restrictive and revs so much more freely. So im one happy bunny

MJ05LLY · 12th August 2010, 19:44

Final update for the time being, is on the audio side. I decided to get the headunit ive always wanted

auds · 12th August 2010, 20:45

Well you have been a busy boy haven't you

Loving the blue calipers

very good job done there

Liking the headunit too