I think all axles will fit... maybe not very easily if your chassis is bent
I think there are only a few varieties so for a straight forward swap just match...
- Drums 3 stud
- Drums 4 stud
- Disks 4 stud
- Disks 4 stud with abs
Think that’s it... someone correct me if I'm wrong though
Then there’s just 4 bolts (2 in the under boot carpet and 2 under back seats), 2 brake hoses and the handbrake cable holding the whole assembly on! Just have to take the exhaust off (cat back) and the spare wheel off! And it should be a simple swap!
Only special tools you will need are a deep 18mm socket (most socket sets skip 18mm

), a brake hose spanner and a piece of clear pipe to bleed the brakes.