saxo 1.1 east cost my first project!!white 205 git's! BACK FROM BODYSHOP ! all smothh VTKIT ON pg BIG UPDATE PG 12

[kxhaz]

1ST UPDATE

hello evyone this is my progress thread for my first car (1.1 east cost) im 16 and am 17 in feb so i have sum time to get it to how i wont it to be. my dad got the car about 2 weeks ago for 200£ it pritty clean apart from a smashd in pasangers door.

some picks of the car whn i first got it.











first job:

change axle from a 106 to get four stud hubs. here is the 106:


luckaly my dad has his own garage with two ramps so i could get both cars up in the air to swap the axles.

first off was to get the back box off



then it was take of brake pipesand start undoing the bolts.
after a while the axle came out.





then it was axle out of the 106 (bad pik)





swap them around and start bolting together again.
four stud hubs now on the saxo


my tool box



the wheels that i will be using on the sax (will be painting white at a later date. bad pik (1900 pug 205 gti wheels)



so it was on with the wheels



now they were rubbing on the inside arch!
so i found a set of 6mm spacers lying around the workshop.



chucked em on



work a treat.
on the floor.




some befor and after photos

befor

after


befor

after


befor

after


so thats the back next job the frunt i will be taking the whole frunt end of off the 106 and swaping it.


TO DO AND DONE LIST:

change axle for 106 4 stud
change front suspention to 106 4 stud
paint 205 1900 gti wheels white
fit vts intirior
find and fit mirror caps (got but not fitted)
de wiper
lower 50mm
mesh grill
install ice
find and fit vt bodykit (got everything apartfrom front bumper)
pik up and fit bonet and door from steve_355
delock
debadge
fit electric window moters and wire up
engine rebuiled
build fals floor
build or buy sub box
mount tweeters some how
find ad fit spoiler
find and fit nice back box
full respray
maybe tint back three windows


EDIT:

thought i would do a lst of how much moneyyss if spent on it just to depress my self lol haha

engine rebuild about £200
rad £ 60
paint for wheels £ 40
front comps £ 70
mirrer caps £ 15
spoiler £ 30
back box £ 40
intirior and back end of vt kit £180
front arches £ 50 ( 25 each)
lower arms £ 60 ( 30 each)
anti roll bar clamps and rubbers £ 20
clips for vt kit £ 20
springs (50 mm) £ 40
door and bonnet £ 60
front bumper £ 55
cone filter £ 12

all i can think of atm lol

grand total of ... £952 ouch lol

[Saxy1]

looks tidy apart from the door mate.

[kxhaz]

thanks m8

[old_timer]

FOUND 6mm SPACERS LAYING AROUND WORKSHOP??? thought you found them on the 205 you had the wheels off

[steve_335]

looks good mate, should be nic when it's done

[Ryyy]

Looks Nice 'n' Tidy
How much it cost?

[Ashleyp]

bargain at £200 tbh! door wont cost much to replace.. and luckily you have a dad with a garage thats gonna save you a lot of time n money in the future lol

[kxhaz]

Originally Posted by OoORaZzAOoO

Looks Nice 'n' Tidy
How much it cost?

was 200£

[kxhaz]

Originally Posted by AshleyPrigmore

bargain at £200 tbh! door wont cost much to replace.. and luckily you have a dad with a garage thats gonna save you a lot of time n money in the future lol

yh i no lol has alredie saved me aload of time

[-Jason-]

So many people using 205 gti alloys

[kxhaz]

Originally Posted by JasonGTI

So many people using 205 gti alloys

lol they look good but might be using 405 mi16 wheels now dono what ones to go for i have both. what you guys think





wil be in white to

[Leemc2008]

You going for VT kit?

[kxhaz]

yeah probly

[kxhaz]

update 2

today i changed the frunt suspention over from the 106 to get the four stud wheels on.

first off me and my dad took the engine out of the 106 as my dad is turning it into a mi16 track car.









now that that was out the way i started to take the suspention out.





then i took out the wish bones and anti role bar from the 106.



now it was time to start to strip the sax.

on the ramp



so it was out the with the saxo suspention.





and on with the 106 frunt sus



now i dont no that wheels to put on it its either 205 gti's or 405 mi16's

what you think ?





what it looks like now





i no its got odd wheels was trying to decide what ones to use lol

[Matty_VTR]

205gti's ftw this is a proper good progress thread. keep up all the good work.

[kxhaz]

thanks mate

[AM4R]

wow, nice one bud for doing it all yourself!

[s3tre2003]

i quite like either set tbh mate

paint both.. then you got a spare set =]

[rozaladdd]

where you gunna get the door from mate my drivers door is exactly the same massive dent in it n i cnt get ther f**** out, went to my local scrapys n they aint even got saxos n sed they never really get them in. ?

Also im getting a vts next year so if thier too dear and alot of hassle i wouldnt bother.

[kxhaz]

there is a citroen scapy nere me and ebay sumtimes ppl are braking cars on there