| Saxo Problems & Queries If you're having problems with your Saxo and you're after a bit of advice, check this forum out... |
 |
14th August 2009, 16:39
|
#1
|
|
Saxperience Forum Bum
Join Date: Apr 2009
Location: Los Anglesey
Posts: 3,416
Car(s): Ibiza Sport TDI / MK1 VTS
|
Help Please.. Lamba Sensor...
Right....Ive just bought a raceland 4-2-1 manifold... Ive got all the parts from
Citroen.. Oil filter.. etc...
Just wondering, I havnt had the chance to get a sleave yet... Soo would it be ok just taped up or something for a while?? ....
I know the einge light will come on.. but is that it ? only the light or.....??
Thank You in advance!!
|
|
|
|
14th August 2009, 17:17
|
#2
|
|
Established Member
Join Date: Jan 2009
Location: Isle Of Wight
Posts: 1,028
Car(s): Saxo Mk2 Furio 03
|
Same problem here, im fitting my full system and raceland mani on monday, im thinking up by the battery tray should be able to secure it there nicely,,
were do you get the sleeves ?
think ive seen them on gmc ???
|
|
|
|
|
14th August 2009, 17:42
|
#3
|
|
Established Member
Join Date: Jul 2008
Location: Thame
Posts: 1,059
Car(s): A Saxo Ennit.
|
i would also like to know..
|
|
|
|
|
14th August 2009, 18:16
|
#4
|
|
Saxperience Post Whore
Join Date: Apr 2007
Posts: 6,640
Car(s): Integra DC5R & VTS
|
Are we talking about the post CAT lambda here? If so, just disconnect it - the engine management light will come on but the car runs no different. Then when you have the sleeve, connect it back up and the light will soon go out.
|
|
|
|
|
14th August 2009, 18:24
|
#5
|
|
Saxperience Addict
Join Date: Oct 2008
Location: Plymouth, Fiddling - under a two poster ramp
Posts: 14,064
Car(s): Audi
|
light comes on . . . then diagnostic machine, to turn it off...
|
|
|
|
|
15th August 2009, 03:32
|
#6
|
|
Saxperience Addict
Join Date: Jan 2007
Location: Aylesbury, Bucks
Posts: 12,836
Car(s): Yeaaahh Fiesta
|
i just unplug from the loom, and stick abit of tape over the light if it really bothers you
|
|
|
|
|
15th August 2009, 11:01
|
#7
|
|
Saxperience Post Whore
Join Date: Apr 2007
Posts: 6,640
Car(s): Integra DC5R & VTS
|
Quote:
Originally Posted by tonto_VTR
light comes on . . . then diagnostic machine, to turn it off...
|
Connected mine back up with the sleeve and it went off straight away. If it stays on for a while, disconnect the battery for 30 mins or so and it should go out after a few drives.
|
|
|
|
|
15th August 2009, 11:59
|
#8
|
|
Established Member
Join Date: Apr 2008
Location: Essexshire
Posts: 1,885
Car(s): zx7r, 28 seater optare
|
i had problems with mine. i had a raceland manifold but put it back to standard. the other day i had enough of the engine light on so i tried changing the post cat lambda sensor. it was damaged so i had to cut it to get it out then realised the new one wouldnt go in. i think it was because the gearbox bolt on the exhaust wasnt in so the sensor had hit the gearbox casing as the exhaust wasnt in line. anyhoo, i put the cut down sensor in as a temp measure and connected the new one and cable tied it near the battery. the light went out after about a day and i dont have a sleeve on the sensor. it seems to be running ok now. sorry for the thread hijack.
__________________
Road legal kdx125 wanted!!!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 14:32.
|
Linear Mode
