16v engine differences? - Saxperience

Saaamon · 20th December 2009, 01:44

I need a new engine for my VTS but i'm unfamilar with models etc. Basically what i need to know is, can i by any 16v engine for either a VTS/GTi and will it be the same? For example if i buy an engine from a 02 saxo, will it be the same as the one i already have in my car which is a 99 model?

All i need is a head + block then i'm going to re-build that, then take the orignal engine out, swap the inlet, alt, gearbox etc then bolt the fleshly built one in.

If anyone could point me in the direction of a saxo breakers, preferably nearer essex (unless they post) that would be great.

Cheers, Simon.

raunchz · 20th December 2009, 09:21

Try this:
http://www.saxperience.com/forum/search.php

or this might be some help:

http://www.saxperience.com/forum/showthread.php?t=84099

Saaamon · 20th December 2009, 09:32

Quote:

Originally Posted by raunchz

Try this:
http://www.saxperience.com/forum/search.php

or this might be some help:

http://www.saxperience.com/forum/showthread.php?t=84099

Niether answer my question very well but thank you anyway.

Sparco_Tom · 20th December 2009, 09:37

you can use any 16v engine from any year and swap your inlets etc over. You would need to swap a few sensors over so they worked with your loom. You could just take the sensors from your current engine and fit on the new one

Saaamon · 20th December 2009, 09:43

Quote:

Originally Posted by Sparco_Tom

you can use any 16v engine from any year and swap your inlets etc over. You would need to swap a few sensors over so they worked with your loom. You could just take the sensors from your current engine and fit on the new one

Nice one thats the answer i was looking for, cheers fella!