Spraying bump strips

[Saxovtrreppy]

Hi there i am thinking wether to spray the bump strips on my vtr gloss black do you have any ideas on what i would need to do this?????

[saxo_singh]

Few sheets of sand paper, primer, paint. And masking tape to mark areas you dont want to spray.

[jaytay]

make sure u key up first tho as all that work be for nothing,as will look great when done if not keyed up right paint will crack and flake off

[ahoward87]

use some fine wet and dry paper as the material is quite soft and can scratch easy with sand paper, just depends how good you want it to look, its all in the prep!

[piebobs71]

does the vt kit just pop off? how many clips per piece of kit?

[stevo67]

Make sure you use plastic primer & a good 1 to use is Halfords filler primer as it fills in slight imperfections.

Steve.

[Saxovtrreppy]

cheers guys great help will see how it comes out n maybe get posting some pictures up when complete

[mirrorblanks]

remember to take ur time on the prep, make sure you sand all the texture down first, if you don't the end product will look terrible

[Sax-Playa]

around how much will you need for doing the whole job ? i fancy doing it but dont want to run out of paint half way..

[mirrorblanks]

Originally Posted by Sax-Playa

around how much will you need for doing the whole job ? i fancy doing it but dont want to run out of paint half way..

depends if doing my cans or properly with a gun

i'm not far from you so if you want a pro to do it drop me a pm