| Saxo Engine/Performance If you're interested in tuning Saxo engines, or if you need to know something which is engine related... this is the place for you. |
 |
25th July 2010, 15:43
|
#1
|
|
L-plater
Join Date: Aug 2009
Posts: 40
|
Engine conversionn (Advice)
Hi everyone basically at the moment i have a 51 plate vtr on 68thousand miles, and im looking to do an s conversion i have mechanical knowledge and can do most things to cars etc, i have a full donor car which is a 2000plate vts on 68thousand miles which i know is single plug ecu and mines 3 plug etc
What would i need to do to do the conversion properly?
a mate of mine said to remove engine, engine loom, and interior loom from both cars and swap them over and just swap the fuel lines.would this be ok as i want all my clocks working how they should etc thanks alot any advice on doing the conversion would be great or if anyone had problems doing theres etc
|
|
|
|
25th July 2010, 18:45
|
#2
|
|
L-plater
Join Date: Aug 2009
Posts: 40
|
bump...
|
|
|
|
|
25th July 2010, 19:04
|
#3
|
|
Established Member
Join Date: Sep 2009
Location: rotherham
Posts: 1,832
Car(s): Be scirocco, full on 03plate track spec Saxo
|
or8t mate, the wregs is bit of a pain in the ass tbh with you, myn when like this.... w reg vtr, late mk1 enegine single plug silver top, mk2 interia loom, if you look at your plugs down near battery where engine loom connects to the interia loom and there the same you dont need to change the interia loom just the engine loom, yes you will also need to rig up a fuel return line then thts it reali mate, where abouts r u? if your close can give u a hand
|
|
|
|
|
25th July 2010, 20:27
|
#4
|
|
L-plater
Join Date: Aug 2009
Posts: 40
|
Quote:
Originally Posted by mark1311
or8t mate, the wregs is bit of a pain in the ass tbh with you, myn when like this.... w reg vtr, late mk1 enegine single plug silver top, mk2 interia loom, if you look at your plugs down near battery where engine loom connects to the interia loom and there the same you dont need to change the interia loom just the engine loom, yes you will also need to rig up a fuel return line then thts it reali mate, where abouts r u? if your close can give u a hand
|
im from wales mate and thanks for the info
|
|
|
|
|
25th July 2010, 21:21
|
#5
|
|
Established Member
Join Date: Sep 2009
Location: rotherham
Posts: 1,832
Car(s): Be scirocco, full on 03plate track spec Saxo
|
no worrys gove me a pm if theres owt else, bit far from wales haha
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 09:12.
|
Linear Mode
