16v conversion

[Ben69]

i want to put a vts engine in my furio so can someone tell me everything i need??

thanks

[WhiteyVTR]

I would like to kno this too, must be Engine (obviously), ecu, loom?
My mechanic charges £150per day to fit so I need EVERYTHING otherwise it may get costly

[Vtralex]

lower engine mount I belive, top rad hose, radiator and fan is also helpfull..

[ryansaxo2010]

engine same phase as car other wise ull hav to do alot of wiring, so loom, radiator top rad hose fuel return line mite as well do belt water pump and service parts too... now mounts top of engine , manifold, ecu , all sensors obv,, ermm u can use ur gear box if u change the plugs over otop of the box sum are diff... probs bits ive missd out

[bmxlube]

i have a vts engine for sale in for sale part comes with loom and unlocked ecu

[WhiteyVTR]

How much?

[VenoMNL]

If its everything like the 1.4 Portuguese vts..

I changed all the cables, even inside, but isnt needed.

U just need all engine bay cables and ecu, the motor (with injectors, admission manifold, exhaust manifold etc), gear box can remain urs, like all the motor supports, radiator and fan may remain yours aswell, i dont know how is the weather in UK. everything else may remain.. if i remember

Hugs

[bmxlube]

its £300 posted
http://www.saxperience.com/forum/sho...d.php?t=331931

[LeeM]

youre best starting with a 3 plug ecu and loom to make sure its plug and play.
you need, engine, ecu and loom, make sure the ecu mount is still on the engine as only the vts one fits as well as the manifold as only a vts one will fit the engine.
you'll need a new throttle cable as the 8v ones are too short and id use a long rad if you dont already have one but your current fan will be fine. you'll need to run a fuel return line from the rail to the tank, i used a couple of metres of halfords 6mm fuel hose