Torsion Bars - Saxperience

vtsben · 24th July 2006, 19:31

I live in manchester and have everything done and lose to lower my torsion bars.
Just need someone to take them out for me.
Does anyone know where i can get it done locally ???

Luke · 25th July 2006, 08:31

There is a place in Yorkshire mate, that a lot of people have used on here.

They call him Ricky P, if you want the number mate let me know and i can get it for you.

l1ukeRS · 25th July 2006, 10:01

get yourself a slide hammer ond do it youself mate or wind it out with a socket and spacer

l1ukeRS · 25th July 2006, 10:06

check this out http://www.suzukituning.com/PSA/Suspension/Lowering.htm

vtsben · 25th July 2006, 22:19

Cant do it with the space and m 8 bolt i have tryed that already and is not movin at all.

Jonny_H · 25th July 2006, 23:30

alright mate, theres a garage in denton who shoud be able to do it for you. they will be able to do everything for you.
shouldnt be too dear

l1ukeRS · 26th July 2006, 01:11

as your winding it soak it in wd-40 i heard coke works too form sumhere and get a mate to tap the arm with a hammer, ohh yeah and make sure u get all the screws out and washers before tryinbg, my mate rang me sayin this guide u gave me is shit, so i went to his house and he'd lef the washers in each end the tit lol, good luck if you have another go, if not theres a good place called abp motorsprt in nantwich, dont know how far it is from you but they are good there

Sean · 26th July 2006, 01:31

be careful when winding in the bolt, very easy to get a bit carried away and snap the bolt inside the bar. try removing the washers from both ends of each bar and whacking them through from behind rather than pulling them out, might find this method easier of you drop the rear axle. failing that then it's time to whip out the blowtorch and heat the area around each of the bars. failing that, then you can pay some poor bastard to do it for you.

edit- whoo 4k ASW

ChrisJ · 26th July 2006, 12:43

Send a pm to b0t13, he's from manchester, he had his lowered by some guy who specializes in lowering saxos and 106's. Hes located somewhere around Manchester airport.

Hope that helps.

vtsben · 26th July 2006, 18:01

Well i have foud another guide which is the best one yet
You are serpose to undo the screw at the back of both torsion bars before trying to pull out.
so i will be trying this at the weekend and fingers crossed show come out.

vtsben · 30th July 2006, 23:04

b0t13 you have PM off me !!

l1ukeRS · 31st July 2006, 00:01

whats the other guide uve found mate u got a link post it up
cheers

LucaZone · 31st July 2006, 11:31

Is there anywhere in the south central, west london area that would do lowering?

Seems all car mod places are midlands or north

vtsben · 31st July 2006, 18:18

This has got to be the best way to lower your car.
http://www.badgermotorsport.co.uk/lowering.htm

b0t13 · 31st July 2006, 18:23

pm replied too..

vtsben · 31st July 2006, 18:35

bot13 you have PM

b0t13 · 31st July 2006, 18:40

i dont

vtsben · 31st July 2006, 18:43

well add mk3golf@hotmail.com to your msn so we can speak

b0t13 · 31st July 2006, 18:45

done....

l1ukeRS · 2nd August 2006, 19:43

the badgersprt guide is good until u get to the passenger side and find that the arch get in the way and the slide hammer is a pain in the arse to get the bar out that way, socket and spacer is easy