20mm too much?

[tontow]

Will 20mm spacers be to much for 195/45/16 wheels? Will they rub on the outer body arches or stick out too much?

thanks

[Nick_T]

depends if you have it lowered
if not, the back would be fine on 20mm spacers but the front might clip the arches when you are turning seeing as you have beefy tyres

hope that helps

ps, why do you want 20mm spacers?

[tontow]

Only ones i can find as a kit on ebay Its not lowerd yet either but planning a 40mm in future, Could it be a problem?

[Barry123]

Originally Posted by tontow

Only ones i can find as a kit on ebay Its not lowerd yet either but planning a 40mm in future, Could it be a problem?

yup... you should really aim for 40 profile tyres with you're going with 16's

with spacers (unless its to get the correct offset) you'll be making the problem even worse.

ad

[Mysticp]

If you can find out the ofset of the wheels your putting on then we can tell you whether 20mm is too much or too little. 40mm will always be too much i reckon though

[tontow]

They are the C2 VTR alloys. The spacers i want are hub centric if that means anything?

[JoeFurio]

there et25 i think - only require 10mm spacers

[Nick_T]

Originally Posted by tontow

They are the C2 VTR alloys. The spacers i want are hub centric if that means anything?

C2 VTR alloys are 15s
do you mean C2 VTS?

[tontow]

nah, they are 16 dude. i know 10mm is the best way to go but i cant find any 15mm the best i could find