what does this mean ..

[jackbell]

can you give me more informations

is is 7' or 8' wheel

4x108 wheel ??
whitch ET ?

a bloke said this to me on ebay as im selling my alloys could comeone tell me

[Mikey]

am i the only person who doesnt understand that

[jackbell]

what the question the bloke asked me or wat i put lol ..

[Mikey]

all of it lol

[jackbell]

k pal lol ...

im tryin to sell my brothers wheels on ebay and this bloke sent him a question about the wheels which was ..

can you give me more informations

is is 7' or 8' wheel

4x108 wheel ??
whitch ET ?
.................................................. ..................................
ive not got a clue what he means mate

[baker556]

basically hes saying what size stud fitment is the wheel if it fits a saxo it will be 108 mate he just checking it fits the viechel ....so if it did come off a saxo say 108 fitment.

[smiith]

and the 7 or 8 means are the wheels 7 or 8 inch wide.

185 or 195

[Curran]

Originally Posted by smiith

and the 7 or 8 means are the wheels 7 or 8 inch wide.

185 or 195

185 is to do with the size of the tyre, not the wheel.


he is asking for the width of the wheel....... 7 or 8 inches?

the offset of the wheel....... the ET.......this should be stamped on the wheel somewhere e.g. ET15

and the stud pattern.......4x108 if they have come off a saxo.

[furiomike]

the PCD of 4x108 is good. i dunno what it is but im guessing something to do with the bolt holes

a saxo wants at ET (or offset) of about 15 to 20. i think this is something to do with the gap between your car and inside of the wheel. if the ET number is too high like 30, i think you can use spacers to counter this.

7 or 8 is probably the width of the alloy wheel in inches. on a saxo i think youd usually use 6.5 or 7. either of which you could stick a 195mm tyre on.

[Curran]

what i said is correct......believe me

have a read here if you still dont understand

http://www.1010tires.com/tech.asp?type=wheels#offset

[furiomike]

Originally Posted by Curran

what i said is correct......believe me

have a read here if you still dont understand

http://www.1010tires.com/tech.asp?type=wheels#offset

i agree with u lol

[jackbell]

top lads cheers for that will check that lot out tommorrow on them nice1

[d4r3n]

what i said is correct......believe me

have a read here if you still dont understand

i agree with you too mate..