N.A. Saxo Vts **From Turkey** :D

[nazmitocak]

Before

After
….
Hi Mates:
We prepare my car in Turkey, Most of the parts came from U.K. .
I Try to prepare the car for drag race and rolling
I will share videos later.


JJ SAXO VTS SPECS
80 mm. 12.2 comp. Wiseco piston
CRS h-beam connecting rod
Oem Top Cover gasket
OEM timing set
Oem oil pump
OEM Water Pump
Top cover port-polish
Acl Race Series main and rod bearings
Pipercam double Valve Springs
OEM valves
KentCams PT52 Cams
Adjustable cam pulley Kentcams
Kentcams followers
Oem fuel pump
AEM fuel regulator
Msd coil and wires
Qualife locked differential
Custom ceramic Clucth
Saxo Spoox QuickShift
Saxo Mocal oil cooler kit (stainless steel)
Fidanza Lightweight Flywheel
4-1 custom exhaust manifold
60 mm catback pipe
Borla Exhaust
GMC / ATP Thorttle Bodies
OMEX 600 ECU + Basic Loom


Prokit Eibach Springs
Sparco upper brace
Silicone Hose kit

Morette Mk1 Saxo headlamp
M3 style rear light ??
Black signals


Sparco Sprint V seats
Sparco carbon fiber pedals
Sparco gear knob
Momo Top Power Steering
Plasma indicator kit (kph / mph)
Apex Turbo Timer
PROSPORT 52mm oil pressure Gauge
PROSPORT 52mm oil temperature Gauge
PROSPORT 52mm egt Gauge
AEM wideband

[Proffitt]

Nice spec mate

You got any more plans?

[gox]

Should be very fast with those specs! Can't wait to see some videos

[nazmitocak]

Update ...
Fidanza flywheel broke down on warm up before drag race
So we put the car back to the truck go back 600 km . to my city.
Mechanicer said that 9000 rpm is to much for saxo, around 9000 rpm flywheel cause balance and broke down as i understand.
Any way he change fidanza with orginal flywheel.

Some rolling invitations came from N.A 106's , clio rs, e36 m3 , and colt czt, we will see the results

[raunchz]

Is pretty dodgy that it broke apart because of 9k rpm.

Atspeed on here do a good solid lightweight flywheel

[Rob_McLav]

nice spec like the twin headlights. i want some now!!

[axsaxoman]

Originally Posted by raunchz

Is pretty dodgy that it broke apart because of 9k rpm.

Atspeed on here do a good solid lightweight flywheel

very common with fidanza flywheel --two part alloy+steel -thats why i don,t use them .
-no point in going to 9k with pt52 cams anywa max power will be well below 8k -just maikng a noise

[nazmitocak]

Update ....
we attend to a drag race in Konya, Konya is located in the middle of turkey, and its 1010 meter high from the sea level, think about the air pressure

İ made 13.822 sec.

Some pictures from Konya Motodrag Track (16.10.2011)




Uploaded with ImageShack.us

[nazmitocak]

[nazmitocak]

Uploaded with ImageShack.us

[wadoryu]

nice car mate love it

[sebring]

really nice pics bro!!!!

[jeffchiz]

might sound stupid but whats with the film over the boots?

[nazmitocak]

Originally Posted by jeffchiz

might sound stupid but whats with the film over the boots?

Sorry , What do you mean ?

[Jay_]

you don't seem to have a rear window. As with other cars! They have something like RACE written where glass should be?

[SSN869]

Başarılar Nazmi kardeşim...Atmosferik olarak epey yükselttin aracını...
Kazasız,sorunsuz günlerde kullaanmaya devam inşallah...

very nice saxo VTS....

[nazmitocak]

Hi Mates:
We made afew updates on my saxo ;
ph5 cams installed with newman solid lifters and newman single springs.

I attend to a drag race last sunday, With new setup and new tires.

last year my best time was 13.824 sec
This year ı am expecting better but was very unlucky
first best time of this year is 13.808

Here are some in car videos
14.3xx , with broken flywheel socket last 30-40 meter
14.3xx.wmv - YouTube

13.911 sec leaving throttle last 50 meter ???
13.911.wmv - YouTube

14.xxx shifting fault

14.xXx.wmv - YouTube

[nazmitocak]

I make a custum air box for ITB, this is for daily drive, I am planning something fantastic for race use



[/QUOTE]