UPDATED new PICTURES! PAGE 13 New Motor WhiteVTS REFURBED WHITE WHEELS, BONNET BRA, LOADS PHOTOS

[mjLvts]

I got this about 2 weeks ago now.. and my plans are suttle mods, and preformance mods.

i will keep this thred updated as i go along which wats been done and pictures.

ideas and thorts are welcome mike




Standard when i got it....

[Marshy]

Good find mate, looks clean and unabused

[mjLvts]

First things first I was goin to do a service.. but in the book it had just had one. And the guy said it had the day before.

but i thort i would check it had anyway... so i did an oil change anyway and to amazement the oil was nice and fresh. the Air filter was brand new.The cam belt was brand new aswell and the disc's pads were all brand new so i was happy with that, and left it at that.

they was slight knock on the front. so i changed the 2 front anti roll bar linkages.



and the n/s/f bottom arm as the ball joint had a lot off play on it. And for the price it was well worth just getting the arm than having the mess on pressing the ball joint in the arm its self. With disscount from work was hardly nothing.



and to add to my findings the front and rear end had a full set of powerflex bushes

[Wayne]

Liking your saxo alot buddy i would just lower it.

[mjLvts]

like i said suttle mods nothing major ull see it anyhow. thanks tho wayne

i had a 106 gti before and that was very nice ... i want the preformance to be some where near as well. and then improve further,

gti ran a 14.7 at york race way. and a 0-60mph at 6.3 with bald tyers which didnt help.
was an impressive day..

went down 6 times... beat an:

astra van Redtop
dodge charger
106 gti which had been cammed and chipped. ( mine had not)
focus st Twice

and got beat by an RST series 1. running a cossy lump and 4WD


if anyone wants the times of the runs. ask ill dig em out and post them up

[N9KKC]

looks clean mate

[Liam_]

Is that GT3's old motor? Looks nice.

[mjLvts]

i have no idea who Gt3 is mate... if u tell me where he lives ill know. and tell u

[Liam_]

Actually, I think a few Sax-P people have had it... least you know its been looked after. Linky.

[mjLvts]

I cant view that link.. permisson not aloud.

it was off an oldish guy... if it helps from thirsk. and im the 3rd keeper

[Saxy1]

Very smart mate.

[ashyboyo]

agreed very smart buy!!

[mjLvts]

been busy this week...

*got round to lowering my car.. which was a 60mm drop all round.

*Dewipered the back

*fitted my enclosed filter.. and relocated my steering fluid resiviour.

*registered my plates on the car. Last names Lamb, nick is Lamby if i aint guessed

*Car is stickered up with 2 sax P stickers. One on front panel and 1 same colour as the car on the boot.



Heres some pictures below to show my progress comments welcome.

[Daffron]

mmm looks nice, good mods so far nothing stupid

You need a drive

[mjLvts]

Best tool i ever bought at work... Takes half the time to do wat ever ur doin!

[mjLvts]

thanks

I have a drive .. thats my mates.

[gdwelsh]

Your not messing about are you...

I'm wanting the same thing, suttle.

Good Luck.

P.S
Who lowered it?

[mjLvts]

Nah no point .. exhaust, manifold, and quick shift next but ill need the bumper doing first before i fit the exhaust or it will look daft.

and cd player should be here anytime soon

I done the front, and i didnt fancy the back i know how hard they can be sometimes from experience. so i got a friend brigsy to do it.

just noticed your from skelton, have i seen u around?

[gdwelsh]

just got mine so possibly not...

I have a 306 GTi tho (P99PUG) you may have seen that around?

Would you be interesting helping me out doing a few things?

[mjLvts]

Yeah i dont see why not.. ill probley see you around soon anyway so just pop over

i probley have.. but i dont recall the reg.