Painting VTR Kit

[Ramsay]

hi can any1 let me know what id need and how hard it would be to paint a vtr kit its on the car atm and in silver looking to paint it black

[Pieface]

Depends on your equipment, experience, and time.

[Ramsay]

what equipment ??
no expierience lol
unlimited time

[mischief]

unlimited time means time to learn. take your bodykit off to spray it makes it alot easier and do it in a dry dust free area with no wind. and just make sure you get the preparation right.

planing and preparation prevent poor piss performance

[Saxo-Mike]

Best thing to do mate go scrap yard and get any old body pannel and practice

[SamW]

Sand paper, Wet&dry, Primer, laquer, paint, and tape (if your not doing the bump strips


Sand Down
Prime
Sand down
Prime
Sand down
Prime
You may wish to use very fine wet&dry here

Each time you sand down use a lighter grain of sand paper (less ruff)

Apply coat one of silver
Wet & Dry
Coat two of silver
very very fine wet & dry
Coat three of silver

Allow to try once happy apply two or three layers of laquer...

Think thats about it...Try do it in a dust free area and take your time as to get the best finish...

Hope thats helpful

[SamW]

Get some picture up when its done mate! See how you done... good luck