Raunchz: Westcoast S - 07/07/2010 (Page 22) - Parts Pictures and Engine bay Pics

[raunchz]

Boost Parts Bought

I've be hunting around for some boost parts seeing as I've now got a huge list of bits to buy !

Been speaking to a couple of people and one of them had a few bits for sale, as a result my wallet has come away a tad lighter (bargain prices though) and the following has now been bought:

- C2 VTS Inlet
- ATPower 55mm TB
- Adapter plate for the above
- 630cc Injectors and fuel rail (came off a 290bhp car so will be fine)
- GMC Supercharger Bracket
- GMC Idler and Tensioner Puller for s/charger
- GMC Alloy Crank Pulley
- Supercharger Belt (although might be too short - will do for measuring it up)

Should still have change from selling my TB's to fund the above

I'll put some pictures up when they've all arrived

[moxy89]

ooo haaaii mr ross car is going to be epic.. mr bodies will be on my car i hope ....

[Andy_K]

Fast work already lol.

[raunchz]

Originally Posted by Andy_K

Fast work already lol.

As soon as I heard about these parts for sale I almost bit his hand off, now to work on him with his 94 charger

Although I think I'd rather hold back and get a new one for warranty purposes.

[Andy_K]

Depends how much he's wanting for it/how old etc.
I'd sack off a waranty for a healthy cash saving tbh

[Shea]

looks like u got some good plans

[raunchz]

Originally Posted by Andy_K

Depends how much he's wanting for it/how old etc.
I'd sack off a waranty for a healthy cash saving tbh

Yeh I know what you mean, will have to speak to him, pretty skint though now and sorting a baffled sump out too.

Originally Posted by Shea

looks like u got some good plans

Thanks mate, fingers crossed it will all be worth it!! It's just that first drive of it having been mapped that I'm looking forward too!

[Colin]

Sweet dude, you dont hang about!

The car wont hang about after its all done either...

[raunchz]

Also guys,

what you reckon I should do with my cut scuttle now it's not going to be needed

I was thinking of maybe some new bulkhead soundproofing from Citroen to cover it? And then getting a new scuttle cover (the part under the scuttle cover that covers the wiper motors)

Could try and weld a sheet across the hole, and then do the above ?

[raunchz]

Originally Posted by Colin

Sweet dude, you dont hang about!

The car wont hang about after its all done either...

Thanks mate, I'm hoping it'll be a bit scary to drive !!! You at the Race Retro with TRS on the 12th/13th? As I might be popping along to it

[Colin]

Originally Posted by raunchz

Thanks mate, I'm hoping it'll be a bit scary to drive !!! You at the Race Retro with TRS on the 12th/13th? As I might be popping along to it

Indeed i am! Im on the friday 12th, hopefully see you there dude.

Im sure it will be scary... Torque steer for the win! lol

[Andy_K]

I'd drop a piece in the scuttle. Can either cover it with sound proofing, or fill over and paint it.

[raunchz]

Originally Posted by Andy_K

I'd drop a piece in the scuttle. Can either cover it with sound proofing, or fill over and paint it.

Thanks mate, I think that's prob the best idea, i'll try and weld a sheet in, then soundproof over it - and paint the inner scuttle part of it.

I was looking at having the coolant header tank in the scuttle (like andy-l?) so might be able to work a few holes into the sheet.

[blackie_2k5]

sheet it and fill it IMOds looking very tasty thus far, think im gonna have to get a move on mind

[raunchz]

Originally Posted by blackie_2k5

sheet it and fill it IMOds looking very tasty thus far, think im gonna have to get a move on mind

thanks, you're lagging behind here !!! You're thread hasn't had an update for a long while now the weather's getting better should have plenty of time

[Andy_K]

Andy-l's was the tank for water injection iirc. But yeah - would neaten the bay up with the header tank in the scuttle.

[raunchz]

Originally Posted by Andy_K

Andy-l's was the tank for water injection iirc. But yeah - would neaten the bay up with the header tank in the scuttle.

Ah okay, water injection eh - nice !

I'm just nervous about attaching the engine loom to move the Predator somewhere else - will see how brave I feel, so might have to leave the Ecu tray in there, which leaves me little room for tanks

[Andy_K]

Run the GMC alloy header tank? They are tiny. Plenty of room to fit one in front of the ecu tray on the inner wing

[raunchz]

Originally Posted by Andy_K

Run the GMC alloy header tank? They are tiny. Plenty of room to fit one in front of the ecu tray on the inner wing

That's a good shout, It's going to get tight in the engine bay !!

The other 94 build is running a header tank in the middle of the top radiator hose ( the blue S2 rallye)

What setup are you running? I might have to have a little gander

[Andy_K]

I'm running the gmc remote header. I'll see if I can dig out a pic for you

1 sec.....

EDIT: