james1992 POSI VTR Pg6~~coilovers now forsale pm~~

[jeffchiz]

Originally Posted by james1992

i got some of the cheap coilovers but not low enough at the mo

as for the shocks krisb said as i have them b4 is them he best to have out of all the bilsteins or he said apex shocks also how hard is it to put a 106 recess in ????

and the wheels are 7j 13s

cheers for all the comments guys ill try to keep u all up to date a bit more often if i can from now on =) also ill get some more pics when its all cleaned up

KrisB said that B4 shocks are the best out of all the bilsteins?? and yea i bought apex shocks as they are shorter and made for lowered springs.

to fit a 106 recess obviously you would need to hack up a 106 rear bumper and cut it out and then rivet/smooth it in to your bumper, a professional job would be needed but would make the back end look much more oem as you'll have an actual plate recess and you could wire up the 106 number plate lights and with the tow eye smoothed would make it look awesome

[james1992]

Originally Posted by jeffchiz

KrisB said that B4 shocks are the best out of all the bilsteins?? and yea i bought apex shocks as they are shorter and made for lowered springs.

to fit a 106 recess obviously you would need to hack up a 106 rear bumper and cut it out and then rivet/smooth it in to your bumper, a professional job would be needed but would make the back end look much more oem as you'll have an actual plate recess and you could wire up the 106 number plate lights and with the tow eye smoothed would make it look awesome

im sure it was b4s he said
and ye will look in to the whole bumper idea cos i not to keen on it either at the mo but will do forthe time being

[jeffchiz]

Originally Posted by james1992

im sure it was b4s he said
and ye will look in to the whole bumper idea cos i not to keen on it either at the mo but will do forthe time being

I know this is an old comment but b4's are the cheapest shocks bilstein do, they are the worst not the best ones lol they are only supposed to be fitted with a standard spring, 25mm spring max

Anyways I loved how the flatty looked i would have just done a 16v conversion with that

New motor looks good though mk1 FTW!