Well last event of the year and last show for the current saxo wall had a great day at bassjunkies had a nice demo of jason Ds system was very heavy amazing how loud it is for what is a no wall top work mate my system wasnt booming as much as i would of liked as my alt belt was sliping again so was booming engine off then charging as i went thru the lanes. i didnt get my 155 i was hoping for but still happy with the scores i got only downer to th day was my door its kinda broke lucky im replacing they doors for next year
scores with port blocker only used them as one of my goals for this year was to get the system to play 150+ at all pd freqs
150 @ 20hz
153.8 @ 25hz
153.8 @33
152.3 @40
153.9 28hz peak
152.7 average
heres the scores without blockers
1: LiamB (Team Fi) - 2x 18" Fi - Ported box - 4000wrms
Total Average Score = 152.7dB
Peak = 154.4dB @ 33Hz
40Hz = 152.4dB
33Hz = 154.4dB
25Hz = 153.8dB
20Hz = 148.6dB
only thing left todo now befor i pull the build out is to get my 155
im now swaping back over to my standerd alt for the winter then going to test with the fluke 377 clamp tp see if the 14.8v 70amps is better than the 14v 250amps is better as my loudest score so far has been with the smaller alt
250 amp alt
60hz 20.8A x 53.4V = 1,110.7 rms 2.56ohm
55hz 20.6A x 54.9V = 1,130.9 rms 2.66ohm
50hz 18.6A x 58.3V = 1,084.3 rms 3.13ohm
45hz 15.9A x 59.7V = 949.2 rms 3.75ohm
40hz 15.7A x 60.3V = 946.7 rms 3.84ohm
35hz 15.8A x 59.2V = 935.3 rms 3.74ohm
33hz 16.2A x 61.2v = 991.4 rms 3.77ohm
30hz 16.2A x 59.7V = 967.1 rms 3.68ohm
25hz 19.1A x 54.3V = 1,037.1 rms 2.75ohm
vol36
20hz 12.2A x 41.0V = 500.2 rms 3.36ohm
with standerd alt
60hz 20.9A x 54.9V = 1147 rms +37 2.6ohm
55hz 20.0A x 56.1V = 1122 rms -8 2.8ohm
50hz 19.0A x 58.8V = 1117 rms +33 3.0ohm
45hz 16.3A x 61.9V = 1008 rms +60 3.7ohm
40hz 15.9A x 61.6V = 979 rms +33 3.8ohm
35hz 16.0A x 61.2V = 979 rms +44 3.8ohm
33hz 16.0A x 61.9v = 990 rms -1 3.8ohm
30hz 16.5A x 61.5V = 1014 rms +47 3.7ohm
25hz 19.3A x 56.2V = 1084 rms +47 2.9ohm
not bad for an amp thats rated at 787 watts RMS x 1 channel at 4 ohms 1114 watts RMS x 1 channel at 2 ohm @ and my results are with voltage dropping to low 12s
should be some big changes for the saxo next year have teamed up with a friend that has a custom car business so the saxo will be getting lots of TLC on the outside